ICPDAS I-2534 - Industrial 4-port CAN bus Switch
4-port CAN bus Switch
● 4 CAN communication ports
● Compatible with CAN specification 2.0A and 2.0B
● Fully compatible with the ISO 11898-2 standard
● Baud rate : 5 k, 10 k, 20 k, 33.3 k, 50 k, 62.5 k, 83.3 k, 125 k, 250 k, 500 k, 800 k, 1 M bps and user-defined
● CAN bus filter is configurable
● 100 data frames buffer for each CAN channel
● Max data flow up to 2500 fps for all CAN channel
● Selectable baud rate by rotary switch
● Selectable 120Ω terminator resistor by DIP switch
● LED for CAN reception and transmission
● Support CAN network with star or tree topology
● Extending the CAN bus distance to expand the CAN network size
● Integrating different CAN network with different baud rate
The I-2534 is one kind of CAN bus switch. There are four independent CAN channels which offer a flexible design of the start or tree network topology. This new topology could resolve the complex CAN bus application, like industrial machinery, building automation, vehicle automation, and etc. Furthermore the I-2534 integrates and exchanges data between different CAN network which has different baud rate. It helps users to extend the CAN network system. The I-2534 could increase the maximum CAN node count in a CAN network by splitting the CAN network into several subnets. In additional, the user-defined CAN baud rate and CAN filter configuration are also supported.
APPLICATIONS
● Control System
● Building Automation
● Factory Automation
● Distributed data acquisition
| Controller | 32-bit Microcontroller, 60MHz |
| RTC (Real Time Clock) | No |
| Watchdog | Watchdog IC |
| ESD Protection | 4 kV Contact for each channel |
| Transceiver | NXP TJA1042 |
| Channel Number | 4 |
| CAN Specification | ISO-11898-2, CAN 2.0A and CAN 2.0B |
| Baud Rate (bps) | 5k, 10 k, 20 k, 33.3 k, 50 k, 62.5 k, 83.3 k, 125 k, 250 k, 500 k, 800 k, 1 M bps and user-defined |
| Baud Rate Selection | Selectable by rotary switch |
| Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple |
| Terminator Resistor | Selectable 120Ω terminator resistor by DIP switch |
| Transmission Distance | Depend on baud rate (for example, max. 1000 m at 50 kbps) |
| CAN Filter | Configurable by user |
| RS-232 | 1 port |
| RS-232 Connector | 3-pin screwed terminal block (TxD, RxD, GND) |
| Round LED | CAN status LED x 4 , Power LED x 1 |
| Input Range | Unregulated +10 ~ +30 VDC |
| Power Consumption | 3.0 W |
| Installation | DIN-Rail Mounting |
| Dimensions (w x l x h) | 32.3 x 99.0 x 77.5mm |
| Operating Temperature | -25 °C ~ 75 °C |
| Storage Temperature | -30 °C ~ 80 °C |
| Humidity | 10 ~ 90% RH, non-condensing |
