ICPDAS I-7188XG ISaGRAF Embedded Controller

2~7 dagen

ISaGRAF Embedded Controller with one RS-232/RS-485 port, one RS-485;
512K Flash,512K SRAM,and LED display; Including ISaGRAF Target License

● Creating a Modbus Link with the I-7188XG
● Modbus RTU Slave Ports
● Modbus RTU/ASCII Master Ports
● Expansion Boards and Remote I/O Modules
● I/O Expansion Boards
● Linking the I-7000 & I-87K module for Remote I/O
● Data Exchange: Fbus
● Data Log
● Remotely Download Program: Modem_Link
● PWM : Pulse Width Modulation Output
● Parallel DI Counters
● SMS: Short Message Service

The ICPDAS I-7188XG is a palm-size ISaGRAF PAC and includes ISaGRAF SoftLogic. It has 2 Slave ports (COM1: RS-232/485 & COM2: RS-485). The user can choose I/O expansion board, X-board, to expand the I/Os or memories of I-7188XG. The I-7188XG supports Modbus Slave protocol, Modbus Master protocol, Fbus: RS-485, Remote I/O, SMS: Short Message Service, modem link, MMICON/LCD and User-defined protocol.

Meer informatie
Land van herkomst
OS MiniOS7
Development Software
ISaGRAF v3 IEC61131-3 standard. Languages: LD, ST, FBD, SFC, IL & FC
Max. Code Size I-7188XG/XGD accepts max.64 KB ISaGRAF code size (Appli.x8m must < 64KB)
CPU 80188, 40 MHz, or compatible
Watchdog Timer Yes, default 0.8 second
RTC (Real Time Clock) Provide second, minute, hour, date, day of week, month, year
FLASH Memory 512 KB, Erase unit is 64 KB, 100,000 erase/write cycles
NVRAM 31 bytes, battery backup, data valid up to 10 years
EEPROM 2048 bytes, retention > 100 years. 1.000.000 erase/write cycles
Display N/A
Expansion I/O Bus One optional X-board series I/O board can be plugged inside
NET ID User-assigned by software, 1 ~ 255
Communication Ports
It can be used as RS-232 or RS-485, Speed: 115200 bps max. Program downloads port.
RS-232: TxD,RxD,RTS,CTS,GND ; RS-485: D+, D-, self-tuner inside
COM2 RS-485: D+, D-, 115200 bps max. Self-tuner ASIC inside, Program downloads port.
PWM Output
Pulse Width Modulation Output
All X-board series DO boards support PWM output. 8-channel max. for one controller.
500 Hz max. for Off = 1 & On = 1 ms
Output square wave: Off: 1 ~ 32767 ms, On: 1 ~ 32767 ms
Parallel DI Counter
All X-board series DI boards support DI counter.
8-channel max. for one controller. Counter value: 32-bit
500 Hz max. Min. pulse width > 1 ms
Remote DI Counter All remote I-7000 & I-87K DI modules support counters. 100 Hz max. value: 0 ~ 65535
Remote High Speed Counter Optional I-87082: 100 kHz max. ,32-bit
Modbus RTU/ASCII Master Protocol Up to 2 COM Ports (COM2 and COM3-in-X-board) support Modbus RTU/ASCII Master protocol to connect to other Modbus Slave I/O devices
Modbus RTU Slave
Up to 2 (COM1, one of COM2 or COM3-in-X-board) can support Modbus RTU Slave protocol for connecting ISaGRAF, PC/HMI/OPC Server & MMI panels.
Remote I/O One of COM2 (or COM3: RS-485 if found) supports I-7000 I/O modules & (I-87K base or RU-87P4/8 + I-87K Slave I/O boards) as Remote I/O. Max. 64 I/O modules for one controller
Fbus Built in COM2 Port to exchange data between ICP DAS's ISaGRAF PACs.
Short Message Service
One of COM1, (COM3: RS-232 or COM4: RS-232 if found) can link to a GSM modem to support SMS. User can request data/control the controller by cellular phone. The controller can also send data & alarms to user's cellular phone.
Optional GSM modems: GTM-201-RS232 (850/900/1800/1900 GSM/GPRS External Modem)
User-defined Protocol User can write his own protocol applied at COM1, COM2 & (COM3 ~ COM8 if found) by serial communication function blocks.
Modem Link Supports PC to remotely download & monitor the controller through COM4 of X504.
MMICON/LCD One of (COM3: RS-232 if found) supports ICP DAS's MMICON. The MMICON is featured with a 240 x 64 dot LCD and a 4 x 4 Keyboard. User can use it to display picture, string, integer, float, and input a character, string, integer and float.
Input Range +10 ~ +30 VDC
Protection Power reverse polarity protection
Power Consumption 2.0 W
Dimensions (w x l x h) 123 x 72 x 33mm
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -30 °C ~ +80 °C
Humidity 10 ~ 90 % RH (non-condensing)
Battery Backup SRAM
It can support up to 1024 retain variables with an X607/X608 plug in the only expansion I/O slot. Data can be stored in X607/X608, and then PC can load these data via COM1 or Ethernet. PC can also download pre-defined data to the X607/X608. Optional: X607: 128 KB, X608: 512 KB
ICPDAS I-7188XG ISaGRAF Embedded Controller aanpassen

* Verplichte velden

Uw configuratie
ISaGRAF Palm-Size Programmable Automation Controller
ICPDAS I-7188XG ISaGRAF Embedded Controller
    Mijn vraag gaat over: ICPDAS I-7188XG ISaGRAF Embedded Controller
    To Top