ICS USB-to-GPIB Controller 488-USB2

3~4 weken

USB-to-GPIB Controller Module for PCs

● Converts any PC with a USB port into a GPIB Controller. USB1.1 and USB2.0 compatible.
● Fast >1 Mbytes/second data transfer rate. Reduces test time.
● 32-bit WIN 2K/XP/Vista/7 Compatible Drivers with NI 488.2 style commands. Vista and .NET ready now.
● Multi-controller driver. Mix up to 16 PCI, PXI or USB GPIB Controllers.
● Includes ICS's new Explorer program. Find, configure and control instruments in one program.
● Includes GPIB AnyWhere. Lets you control your GPIB devices from a remote computer or over the Internet.
● Works with NI and Agilent VISA libraries. Supports all major test programs.

ICS USB-to-GPIB Controller Module 488-USB2 is a small USB 2.0 to GPIB Controller Module that converts any PC with a USB port into a full-function IEEE 488.2 Bus Controller. The ICS USB-to-GPIB Controller Module 488-USB2 performs all of the basic IEEE 488.1 functions such as talker, listener and system controller. Its IEEE-488.2 controller routines make it fully compliant with the IEEE 488.2 specifi cation and saves you programming time. The ICS USB-to-GPIB Controller Module 488-USB2 includes ICS's new 488.2V3 Driver which supports up to sixteen GPIB controllers and runs on all Windows 32-bit operating and runs on all Windows 32-bit operating performance way to add GPIB control to a PC and run automated test programs.

Meer informatie
ICS Electronics
Land van herkomst
Verenigde Staten
GPIB Capabilities
IEEE 488.1 Capabilities
The 488-USB2 meets IEE-STD-488.1 with the following capabilities:
AH1, SH1, C1, C2, C3, C4 and C9 E2 Drivers incorporate power up/down protection and signal filtering
IEEE 488.2 Capabilities Includes all required 488.2 controller protocols
and the ability to monitor the bus signal lines.
GPIB Handshake Rate and Timing
Data transfer > 1 Mbytes/sec
Short command ≈ 9 ms
Short query ≈ 18 ms
Times dependent upon test device
USB Specifications
Device Type
USB 2.0 High-speed device
Bus Powered
Compatability USB 1.1 and USB 2.0 compatible
Test Programs Compatibility
488-LPCI and 488.2v3 driver support Aligent Vee (3.1 thru 6.0)
CEC Testpoint with VISA
Labview (4.0 thru 8.2)
MCC SoftWire
MathWorks MATLAB*
Tektronix WaveStar
Codegear Borland Delphi 2007 WIN32
Note: * with optional mfgr drivers
488.2V3 Driver Capabilities
ICS's new 488.2V3 Driver provides the following capabilities:
Supported WIN32 Operating Systems Windows 2K, XP, Serbvver 2003 and Vista 32-bit
Commands Full N1 488.1 and 488.2 command sets except for Parallel Poll and Pass Control.
Number of Controllers 16, any mix of the following ICS Controllers:
488-USB, 488-USB2, 488-LPCI and 488-PXL
Windows Supported Languages Microsoft Visual C/C++
Microsoft Visual Basic
Microsoft Visual Studio 2005
Visual Basic.NET and C/C#
Microsoft Visual Studio 2008 Express
Visual Basic.NET
Included Utility Programs
ICS Explorer - Performs automatic Controller configuration after driver installation and fi nds all GPIB devices. Provides Confi gure, Communicate with Instrument and Installation Verification capabilities.
GPIBkybd - Find and controls GPIB devices. Configure - Manual Controller configuration.
Controls and Indicators
95.3 x 62.2 x 25.4mm
Connectors and Headers
GPIB 24 pin ribbon with metric studs.
Operating Temperature 0 °C ~ +55 °C
Storage Temperature -20 °C ~ +80 °C
Humidity 5-95% RH non-condensing
USB powered
300 mA maximum
Construction RoHS Compliant
Shock/Vibration Normal handling
Included Accessories
Instruction Manual with complete programming instructions and command definitions.
USB 2.0 Cable, 6 foot long
Support CD with ICS 488.2V3 Driver, command libraries, example programs, ICS Explorer and GPIB AnyWhere™ program.
Mijn vraag gaat over: ICS USB-to-GPIB Controller 488-USB2
To Top