ICS PCI GPIB Controller Card 488-LPCI

Levertijd:
2~4 Weken
SKU
488-LPCI

Hi-speed GPIB Controller Card for PCI Bus Computers

● Converts any PC with a PCI bus into a GPIB Controller
● Fast > 1 MHz data transfer rate. Reduces test time.
● 488.2V4 Driver supports 32 and 64-bit Windows XP, Vista and Windows 7with a true 64-bit DLL.
● Compatible with industry standard 'ib' and '488.2' command sets
● Includes short bracket for lo-profile chassis
● Works with Agilent, NI and Kikisui VISA libraries.
● ICS's Explorer auto configures your controller as it finds your instruments.
● Program with Visual Basic, C, LabVIEW, Matlab or Agilent VEE
● Most affordable PCI-GPIB controller with a GPIB-32.dll.

ICS's PCI to GPIB Controller card for 32 and 64-bit Windows XP, Vista and Windows 7 PCs.


ICS's 488-LPCI is a low-profile PCI-GPIB Controller Card that converts any PC with a PCI bus slot into a full-function IEEE 488.2 Bus Controller. The 488-LPCI performs all of the basic IEEE 488.1 controller functions such as talker, listener and system controller. Its IEEE-488.2 controller routines make it fully compliant with the IEEE488.2 specification.

 

The 488-LPCI includes ICS's new 488.2V4 Driver which supports up to sixteen GPIB controllers and runs on Windows XP, Vista and Windows 7 operating systems.

 

The488-LPCI is an easy and economical way to add GPIB control to a PC and run automated test programs.

Meer informatie
Art.nr.
488-LPCI
Fabrikant
ICS Electronics
Country of Manufacture
Verenigde Staten
GPIB Capabilities
IEEE 488.1 Capabilities The 488-LPCI meets IEEE-STD-488.1 with the
following capabilities:
AH1, SH1, C1, C2, C3, C4, and C9
E2 Drivers incorporate power up/down protection and signal filtering.
IEEE 488.2 Capabilities Includes all required 488.2 controller protocols and the ability to monitor the bus signal lines.
GPIB Handshake Rate Up to 1 Mbytes/sec.
Interface Specifications
PCI Interface supports 3.3 V and 5 V
Test Programs Compatibility
488-LPCI and 488.2v4 driver support

488-LPCI and 488.2V4 driver support:
Agilent IO Library (14.2-16.0) 32-bit only
Aligent Vee ( 3.1 thru 8.0)
CEC Testpoint* with VISA
Codegear Borland Delphi 2007
Labview (8.6.1, 2009 and 2010)
MathWorks MATLAB# with VISATektronix WaveStar

Note: * with optional mfgr drivers

488.2V3 Driver Capabilities
ICS's new 488.2V4 Driver provides the following capabilities:
Supported Windows Operating Systems 32 and 64-bit XP, Vista and Windows 7 with true32 and 64-bit DLLs that support the full 32/64bit address ranges.
Commands All NI 488.1 and 488.2 commands except for the following obsolete commands: ibevent, ibist, ibloc for a board, ibtct, parallel poll, pass control and device mode.
Number of Controllers 16, any mix of the following ICS Controllers:
488-USB, 488-USB2, 488-LPCI and 488-PXL
Windows Supported Languages

Microsoft Studio 6
Visual Basic and C/C++/C#
Microsoft Visual Studio 2005, 2008 and 2010
Visual Basic.NET and C/C++/C#

Supplied Headers and Library Files
C/C++/C# and Visual Basic files for Visual Studio6 and Visual Studio.NET (2005/2008/2010).

Included Utility Programs
ICS Explorer - Performs automatic Controller configuration after driver installation and finds all GPIB devices. Provides Configure, Communicate with Instrument and Installation Verification capabilities.
VISAkybd - Find and control GPIB devices witha VISA library
Safety
EN61010-1/IEC 1010
Grootte
121 x 64.5mm (L x H)
Connectors and Headers
GPIB 24 pin ribbon with metric studs.
Omgeving
Operating Temperature 0 °C ~ +55 °C
Storage Temperature -20 °C ~ +55 °C
Humidity 5-95% RH non-condensing
Power
400 mA typical
750 mA maximum
Mechanical
Construction RoHS Compliant
Shock/Vibration Normal handling
Included Accessories
Instruction Manual with complete programming instructions and command definitions.
Support CD with ICS 488.2V4 Driver, command libraries, example programs, ICS Explorer and GPIB AnyWhere™ program.
Low-profile PC bracket
Mijn vraag gaat over: ICS PCI GPIB Controller Card 488-LPCI
To Top