CWE CapStar-100 Carbon Dioxide Analyzer

Levertijd:
3~4 weken
SKU
CapStar-100

Fast and accurate CO2 monitoring for rats and larger animals

● End-tidal peak or continuous readings
● Low sample flow requirements
● Accurate and stable monitoring
● Linear output signal for recording

The CapStar-100 Carbon Dioxide Analyzer provided continuous measurement of expired CO2 over the range 0-10 percent. Its rapid response time, small sample flow requirements, and long-term stability make it ideal for respiratory gas measurement of rodents and larger animals.

 

The heart of the instrument is a miniature infrared analyzer with exceptional stability, low maintenance, and a linear output. The heated measurement cell prevents water condensation. The SensorPod, which contains the infrared measurement cell, attaches to the front panel by a 1.5 m cable. This cell can be removed for cleaning, inspection, or replacement in minutes. The digital display shows CO2 concentration in percent or mmHg, and allows breath-by-breath peak end-tidal reading or continous rapid response. Calibration is performed with a single calibrated gas and room air.

 

The reliability and ease of operation of the CapStar-100 make it the perfect instrument for routine respiratory CO2 monitoring. It is the natural companion to the SAR-830 series Small Animal Ventilators for monitoring respitaroy status. With the AVS-1 Advanced Ventilator System, it can control end-tidal CO2. It can also be used to monitor unassisted animals. Gas sampling rates of less than 30 ml/min can be used, making it possible to monitor animals as small as rats. The fast response time of the CapStar-100 allows end-tidal response plateaus with respiratory rats of 100 breaths/min.

 

A range of accessorie is available to ensure easy setup and convenient operation. An accessory pack containing sample tubing, moisture traps, and Nafion® moisture-absorbing sample tubes is included with the instrument.

 

APPLICATIONS:

● Respiratory monitoring
● Use with ventilated or unassisted animals
● Suitable for rats and larger animals
● Control of breathing & sleep studies|

Meer informatie
Art.nr.
CapStar-100
Fabrikant
CWE
Land van herkomst
Verenigde Staten
Specifications
Analyzer Type

Single beam infrared

Sample Cell Materials Sapphire and Stainless Steel
Sample Inlet Connector 0.062" OD brass tube
Recommended Sample Tubing Size 0.040" - 0.062" ID Tygon™
Measurement Range 0-10% CO2
Analog Output Scaling 100 mV/% CO2 (0-1 V)
Linearity 0.1% CO2
Repeatability 0.1% CO2
Response Time (T10 - T90) 100 mS at 100 ml/min. sampling
Response Time (T10 - T90) 130 mS at 50 ml/min. sampling
Response Time (T10 - T90) 250 mS at 30 ml/min. sampling
Zero Stability 0.1% (8 hours), 0.2% (24 hours)
Operating Temperature Range 5 - 40°C
Optical Bench Temperature 48°C, temperature controlled
Warm-up Time 5 min. to 0.2%, 10 min. to 0.1%
Sample Rate Flowmeter 10 - 50 ml/min.
Maximum Sample Cell Pressure ±5 psig
Interference Effects
Vaporized Anesthetic Agents: Negligible
50% N2O: 0.1% at 0% CO2, 0.6% at 5% CO2 (uncompensated)
Nitrious Oxide Compensation Internal Jumper for 25, 50, 75%: 0.1% at 5% CO2
Controls Zero, Span (10-turn dials)
Electrical Requirements 120 VAC/220 VAC switchable, 35 VA
Size (W x H x D)
230 x 130 x 230 mm (Main Unit), 76 x 64 x 76mm (SensorPod)
CWE CapStar-100 Carbon Dioxide Analyzer aanpassen
CAPSTAR-100 CO2 Analyzer, complete with accessory kit , 120/240 V 50/60 Hz

* Verplichte velden

Uw configuratie
Fast and accurate CO2 monitoring for rats and larger animals
CWE CapStar-100 Carbon Dioxide Analyzer
Overzicht
    Mijn vraag gaat over: CWE CapStar-100 Carbon Dioxide Analyzer
    To Top