ICPDAS CAN to Wi-Fi Converter I-7540D-WF

Levertijd:
1~2 weken
SKU
I-7540D-WF

CAN to WI-Fi Converter

● IEEE 802.11a/b/g compliant
● Wireless data transmission via WLAN
● Two different operation modes: infrastructure and ad-hoc
● Point to point or point to multi-points connection via wireless LAN
● Supports WEP, WPA and WPA2 encryption for wireless LAN
● CAN 2.0A/2.0B compliant
● Connect CAN networks via a WLAN bridge
● Communication efficiency: one-way is up to 700 fps (client->server->client), two-way 350 fps (client<=>server)
● Wireless communication: 100m (Without PA) / 300m (With PA)

The I-7540D-WF supports the wireless transmission of CAN data between various CAN networks or a CAN network and a WLAN network according to the 802.11b/g standard.

The I-7540D-WF is highly suitable for connecting mobile (e.g., vehicles or machines) or stationary CAN networks and is often used for short ranges up to 100 or 300 m.(TCP data protocols are available.) Using an appropriately configured router, CAN data can be transmitted over the Internet.

There are two operating modes in the I-7540D-WF: the access point mode and the ad-hoc mode. In the access point mode, the data connection takes place over one or several WLAN access points that are often part of the company's internal IT infrastructure. In the ad-hoc mode, a direct connection is established between a single I-7540D-WF device and a PC or laptop (with an integrated WLAN interface), or with a second I-7540D-WF device.

In this way, The I-7540D-WF can be used as a CAN diagnosis interface. The wireless connection that is established between two I-7540D-WF units can be used instead of a cable, and enables the connection of CAN networks that would otherwise be difficult to link such as rotational machinery.

 

https://fieldworks.nl/media/imageproducts/icpdas/I-7540D-WF1.jpg

 

UTILITY:

 

https://fieldworks.nl/media/imageproducts/icpdas/I-7540D-WF2.jpg

 

APPLICATIONS:

● Factory Automation
● Building Automation
● Home Automation
● Control System
● Monitor System
● Vehicle Automation

Meer informatie
Art.nr.
I-7540D-WF
Fabrikant
ICPDAS
Systeem
CAN Port Channels 1
CAN Interface
Controller CAN Controller inside
Transceiver NXP 82C250
Connector 10-pin screw terminal connecter
Baud Rate (bps) 5K ~ 1Mbps or User-defined baud rate
Isolation 3000 VDC power protection on CAN side, 2500Vrms photo-couple isolation on CAN bus
Terminator Resistor Selectable 120Ω terminator resistor by jumper
Specification ISO-11898-2, CAN 2.0A and CAN 2.0B
Pin Assignment CAN_H, CAN_L
Max Data Flow 700 fps (one-way)
UART Interface
Connector 10-pin screw terminal connecter
COM1 RS-232 (TXD, RXD, GND)
Baud Rate (bps) 2400, 4800, 9600, 19200, 38400, 57600, 115200
Wi-Fi
Module MLiS WiFi Module 802.11b/g
Wi-Fi Channels 1
LED Indicators
Round LED PWR / Wi-Fi / CAN / CNT. / WLAN
Power
Power Supply +10 ~ +30 VDC
Power Consumption 1.5 W
Dip Switch
Init (Firmware Update)
Normal (Firmware Operation)
Mechanical
Installation DIN-Rail Mounting
Dimensions (h x w x d) 108 x 72 x 35mm
Omgeving
Operation Temperature -25 °C ~ +75 °C
Storage Temperature -40 °C ~ +80 °C
Humidity 5 ~ 95% RH, non-condensing
Mijn vraag gaat over: ICPDAS CAN to Wi-Fi Converter I-7540D-WF
U bent wellicht ook geïnteresseerd in de volgende producten:
To Top