Telebyte Line Driver 224

2~7 dagen

RS-232 Line Driver with Control Signals and LCD Display

● DataSpy® Status Display
● Full Duplex & Handshake
● Loopback & DTE/DCE Switch
● DC to 19.2 kbps
● Supports DTR & DCD
● Compatible with Rack Mount model 79
● Optically Isolated

The Telebyte 224 RS-232 Line Driver with Control Signals and LCD Display provides for transmission of a handshake signal in each direction, in addition to communicating full duplex data up to 19.2 KBPS and providing complete optical isolation. Telebyte Line Driver 224 includes Telebyte's unique DataSpy LCD display, which provides the user with important status information regarding the operation of the device. The LCD is useful during the installation and checkout and whenever there are suspected problems. The graphic display presents the user with live status of the transmit and receive data signals, TD and RD, and control signals, CTS, RTS, DSR, DCD and DTR.

Meer informatie
Conforms to EIA RS-232 and CCITT V.24. Pin 4 connected to Pin 5; Pin 8, DCD, is the received handshake signal; Pin 20, DTR is the transmitted handshake signal and must be high to transmit data
Asynchronous, full duplex on two twisted pairs, balanced current loop via optical couplers. Conforms to Bell Tariff 3081 and PUB 4340
RS-232 = DB25 female; 4 wire line=screw terminals and RJ-11
Data Rate
0 ~ 19.2 Kbps
Operating Distance
The following table gives maximum distance as a function of data rate:.

Data Rate (KBPS) 19.2 9.6 4.8 2.4 1.2 .6
Distance (Miles) 1 2 3 5 10 10
110 volts AC, 60Hz., 220V, 50 HZ optional
50.8 x 104.2 x 20.3 (w x l x h)
0 °C ~ 50 °C, 0% to 95% RH
LCD Indicators
TD & RD Graphic, RTS, CTS, DSR, DCD and DTR

* Verplichte velden

Uw configuratie
RS-232 Line Driver with Control Signals and LCD Display
Telebyte Line Driver 224
    Mijn vraag gaat over: Telebyte Line Driver 224
    To Top