Modbus Gateway

 

Desc
per pagina

9 producten

  1. Embedded Internet/Ethernet Controller with one Ethernet port, one RS-232 port, One RS-485 / 512K SRAM / 512K FLASH,and several optional user defined I/O

    Embedded Internet/Ethernet Controller with one Ethernet port, one RS-232 port, One RS-485 / 512K SRAM / 512K FLASH,and several optional user defined I/O 

    ● AMD 80188-40 embedded CPU or compatible
    ● Supports a variety of TCP/IP features, including TCP, UDP, IP, ICMP,ARP
    ● 10BASE-T NE2000 compatible Ethernet Controller
    ● Reloadable Operating Software
    ● Remote Configuration
    ● Diagnostics
    ● 64-bit hardware unique serial number inside
    ● COM driver support interrupt & 1K QUEUE Input & Output buffer
    ● COM port: COM1, COM2
    ● Built-in RTC, NVRAM, EEPROM
    ● User defined 14 I/O lines
    ● Built-in I/O expansion bus interface
    ● Can add on one expansion board only
    ● Built-in self-tuner ASIC controller on RS-485 port
    ● 7-segment LED display for I-7188EXD
    ● Built-in MiniOS7
    ● Program download port: COM1 or Ethernet Port


     

  2. Modbus/TCP Embedded Controller with display (Ethernet enables Modbus commands to run over TCP/IP)

    Modbus/TCP Embedded Controller with display (Ethernet enables Modbus commands to run over TCP/IP)

    Modbus Firmware Features:
    ● Supports VxComm technique for every COM port of controllers
    ● Allowed multi-client (or master) access simultaneously
    ● Firmware modifiable

    Modbus SDK (in C language) Features:
    ● Supports extra user-defined command protocol (TCP/IP)
    ● Register based programming method (easy to use)
    ● Provides user-defined registers
    ● Can link to Modbus/TCP slave devices
    ● Can link to Modbus/RTU slave devices
    ● Can link to non-Modbus/RTU serial devices
    ● Xserver SDK compatible

  3. Embedded Ethernet / Internet Controller

    Embedded Ethernet / Internet Controller

    Modbus Firmware Features:
    ● Converters single Modbus/TCP to multi Modbus/RTU
    ● Supports VxComm technique for every COM port of controllers
    ● Allows multi-client (or master) access simultaneously
    ● Firmware modifiable

    Modbus SDK (in C language) Features:
    ● Supports extra user-defined command protocol (TCP/IP)
    ● Register based programming method (easy to use)
    ● Provides user-defined registers
    ● Can Iink to Modbus/TCP slave devices
    ● Can link to Modbus/RTU slave devices
    ● Can link to non-Modbus/RTU serial devices
    ● Supports X boards
    ● Xserver SDK compatible

  4. Embedded Ethernet / Internet Controller

    Embedded Ethernet / Internet Controller

    Modbus Firmware Features:
    ● Converters single Modbus/TCP to multi Modbus/RTU
    ● Supports VxComm technique for every COM port of controllers
    ● Allows multi-client (or master) access simultaneously
    ● Firmware modifiable

    Modbus SDK (in C language) Features:
    ● Supports extra user-defined command protocol (TCP/IP)
    ● Register based programming method (easy to use)
    ● Provides user-defined registers
    ● Can Iink to Modbus/TCP slave devices
    ● Can link to Modbus/RTU slave devices
    ● Can link to non-Modbus/RTU serial devices
    ● Supports X boards
    ● Xserver SDK compatible

  5. Embedded Ethernet / Internet Controller with default Modbus/TCP firmware and 7-segment display
    Embedded Ethernet / Internet Controller with default Modbus/TCP firmware and 7-segment display

    Modbus Firmware Features:
    ● Converters single Modbus/TCP to multi Modbus/RTU
    ● Supports VxComm technique for every COM port of controllers
    ● Allowed multi-client (or master) access simultaneously
    Firmware modifiable

    Modbus SDK (in C language):
    ● Supports extra user-defined command protocol (TCP/IP)
    ● Register based programming method (easy to use)
    ● Provides user-defined registers
    ●Can Iink to Modbus/TCP slave devices
    ● Can link to Modbus/RTU slave devices
    ● Can link to non-Modbus/RTU serial devices
    ● Supports X boards
    ● Xserver SDK compatible

  6. Embedded Ethernet / Internet Controller with default Modbus/TCP firmware

    Embedded Ethernet / Internet Controller with default Modbus/TCP firmware

    Modbus Firmware Features:
    ● Converters single Modbus/TCP to multi Modbus/RTU
    ● Supports VxComm technique for every COM port of controllers
    ● Allowed multi-client (or master) access simultaneously
    Firmware modifiable

    Modbus SDK (in C language):
    ● Supports extra user-defined command protocol (TCP/IP)
    ● Register based programming method (easy to use)
    ● Provides user-defined registers
    ●Can Iink to Modbus/TCP slave devices
    ● Can link to Modbus/RTU slave devices
    ● Can link to non-Modbus/RTU serial devices
    ● Supports X boards
    ● Xserver SDK compatible

  7. Modbus/TCP Embedded Controller (Ethernet enables Modbus commands to run over TCP/IP)

    Modbus/TCP Embedded Controller (Ethernet enables Modbus commands to run over TCP/IP)

    Modbus Firmware Features:
    ● Supports VxComm technique for every COM port of controllers
    ● Allowed multi-client (or master) access simultaneously
    ● Firmware modifiable

    Modbus SDK (in C language) Features:
    ● Supports extra user-defined command protocol (TCP/IP)
    ● Register based programming method (easy to use)
    ● Provides user-defined registers
    ● Can link to Modbus/TCP slave devices
    ● Can link to Modbus/RTU slave devices
    ● Can link to non-Modbus/RTU serial devices
    ● Xserver SDK compatible

  8. Modbus/TCP Embedded Controller with display (Ethernet enables Modbus commands to run over TCP/IP)

    Modbus/TCP Embedded Controller with display (Ethernet enables Modbus commands to run over TCP/IP)

    Modbus Firmware Features:
    ● Converters single Modbus/TCP to multi Modbus/RTU
    ● Supports VxComm technique for every COM port of controllers
    ● Allowed multi-client (or master) access simultaneously
    ● Firmware modifiable

    Modbus SDK (in C Language) Features:
    ● Supports extra user-defined command protocol (TCP/IP)
    ● Register based programming method (easy to use)
    ● Provides user-defined registers
    ● Can Iink to Modbus/TCP slave devices
    ● Can link to Modbus/RTU slave devices
    ● Can link to non-Modbus/RTU serial devices
    ● Supports X boards
    ● Xserver SDK compatible

  9. Modbus/TCP Embedded Controller (Ethernet enables Modbus commands to run over TCP/IP)

    Modbus/TCP Embedded Controller (Ethernet enables Modbus commands to run over TCP/IP)

    Modbus Firmware Features:
    ● Converters single Modbus/TCP to multi Modbus/RTU
    ● Supports VxComm technique for every COM port of controllers
    ● Allowed multi-client (or master) access simultaneously
    ● Firmware modifiable

    Modbus SDK (in C Language) Features:
    ● Supports extra user-defined command protocol (TCP/IP)
    ● Register based programming method (easy to use)
    ● Provides user-defined registers
    ● Can Iink to Modbus/TCP slave devices
    ● Can link to Modbus/RTU slave devices
    ● Can link to non-Modbus/RTU serial devices
    ● Supports X boards
    ● Xserver SDK compatible

Desc
per pagina

9 producten

To Top