ICPDAS EIP-2060

Levertijd:
2~7 dagen
SKU
EIP-2060

Isolated 6-ch DI and 6-ch Relay Output EtherNet/IP I/O module

● Transfer protocol: EtherNet/IP
● Powerful 32-bit MCU handles efficient network traffic
● 10/100 Base-TX Ethernet, RJ-45 x 2 (Auto-negotiating, auto MDI/MDIX, LED Indicators)
● Support ARP,TCP, UDP, ICMP, DHCP, BOOTP and TFTP protocols
● Easy firmware update via Ethernet
● Removable terminal block connector
● RoHS compliant with Halogen-free
● LED display to indicate the I/O status



The EIP-2000 is an Industrial EtherNet/IP Remote I/O module series. It is equipped with the EtherNet/IP protocol, and allows daisy chain connection, making it possible to transfer data much faster during process control and other industrial automation applications.

Daisy chain connectivity provides a more scalable system with fewer wires to help avoid interference common in factory settings. Otherwise, ICPDAS also provides Utility, It allows user to configure and test the EIP-2000 modules through Ethernet. The EIP-2060 is one of the EIP-2000 Industrial EtherNet/IP Remote I/O module series. It provides 6 digital input and 6 relay output. The digital I/O of EIP-2060 supports built-in I/O functions such as DI counter and DO safe value…etc.

Meer informatie
Art.nr.
EIP-2060
Fabrikant
ICPDAS
Digital Input

Channels

8
Input Type Dry Contact: Source, Wet Contact: Sink / Source
Dry Contact Level Off Voltage Level: Open
On Voltage Level: Close to GND
Wet Contact Level Off Voltage Level: +4V max.
On Voltage Level: +10 V ~ +50 V

Counters 

Channels: 6

Max. counts: 32-bit (4294967295)

Max. Input Frequency: 5KHz

Photo-Isolation
3750 VDC
Digital Output

Channels

8
Output Type Form A (SPST-NO)
Contact Rating (Resistive Load) 5A 250VAC (47~63Hz)
5A 30 VDC
Operate Time
10ms max.

Release Time

5ms max.

Insulation Resistance
1,000MΩs at 500 VDC
Dielectric Strength Between Open Contact: 1000VAC (1 min.)
Between Coil and Contacts: 3000VAC (1 min.) 
Endurance Mechanical: 20,000,000 times min.
Electrical: 100,000 times min. 
Power
Input Voltage Range 10 V ~ 30 V
Power Consumption 1.6 W
Mechanical
Installation DIN-Rail
Dimensions (w x l x h) 110mm x 90mm x 33mm
Omgeving
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -30 °C ~ +80 °C
Humidity 10 ~ 90% RH, non-condensing
ICPDAS EIP-2060 aanpassen
Isolated 6-ch DI & 6 Relay Output EtherNet/IP I/O Module
Aantal

* Verplichte velden

Uw configuratie
Isolated 6-ch DI and 6-ch Relay Output EtherNet/IP I/O module
ICPDAS EIP-2060
Overzicht
    Mijn vraag gaat over: ICPDAS EIP-2060
    U bent wellicht ook geïnteresseerd in de volgende producten:
    To Top