Fieldbus Converters and Gateways

Fieldbus Converters and GatewaysLees meer

Fieldbus is an industrial network system for real-time distributed control. It is a way to connect instruments in a manufacturing plant. Fieldbus works on a network structure which typically allows daisy-chain, star, ring, branch, and tree network topologies with many major advantages to all applications of automation. ICP DAS offers fieldbus products different with different protocols applying in different industrial applications.

ICP DAS provides wide range of fieldbus products, such as industrial Ethernet, CAN bus, ProfiBus,J1939, EtherNet/IP, BACnet/IP EtherCAT, M-bus, Hart... etc.

9 artikel(en)

Ethernet to HART Converter

● Support HART Short/Long frame
● Support HART Burst mode
● Support point-to-point or multi-drop HART mode
● Support connecting up to 15 HART slave devices
● Allow two HART masters
● Provide PWR / TxRx indication LED
● 4KV ESD Protection
● Built-in Watchdog
● Selectable 250Ω load resistor
● Provide four HART channels
● Support VxComm technique


HART to Single Mode Fiber Converter

● Support HART Short/Long frame
● Support HART Burst mode
● Support point-to-point or multi-drop HART mode
● Connecting up to 15 HART slave devices
● Allow two HART masters
● Fiber broken line detection
● Fiber Type: SC ; Single mode ; 100 Base-FX
● Fiber max. transmission distance up to 30 km
● Support firmware update via ComPort
● Built-in Watchdog


RTU/ASCII to HART Gateway

● Support HART Short/Long frame
● Support HART Burst mode
● Allow two HART Masters
● Working in point-to-point or multi-drop HART mode
● Connecting up to 15 HART modules
● Support Modbus RTU and ASCII format
● Support Modbus Slave mode
● Isolated COM Port : RS-232/422/485
● Built-in Watchdog
● DIN Rail or Wall Mounting


Modbus TCP/UDP to HART Gateway

● Support HART Short/Long frame
● Support HART Burst mode
● Allow two HART Masters
● Working in point-to-point or multi-drop HART mode
● Connecting up to 15 HART modules
● Support Modbus TCP/UDP server
● Support Modbus Slave mode
● Support firmware update via Com Port
● Support on-line replacement of HART devices
● Built-in Watchdog
● Mountable on DIN Rail


PROFIBUS/HART Gateway

● HART (4Ch) to PROFIBUS DP-V0 Gateway
● max Baudrate: 12 Mbps
● Automatic transmission rate setting
● Up to 15 HART modules
● GSD File for easy integration in the PROFIBUS Master
● Free utility to configuration and test of GW-7557
● Max in/out message size: 240 Bytes


Serial to HART Converter

● Support HART Short/Long frame
● Allow two HART masters
● Working in point-to-point or multi-drop HART mode
● Connecting up to 15 HART modules
● Provide utility tool for module configuration
● Isolated COM 1: RS-232/422/485
● Provide PWR / RUN / ERR indication LED
● Built-in Watchdog
● 4 kV ESD Protection


USB To HART Converter

● Support HART Short/Long frame
● Allow two HART masters
● Working in point-to-point or multi-drop HART mode
● Connecting up to 15 HART modules
● Provide utility tool for module configuration
● No external power supply (powered by USB)
● Support firmware update via USB
● Provide PWR / Tx / Rx indication LED
● 4kV ESD Protection

8-channel HART Current Input Module

● Support 4~20mA current input
● Support HART protocol
● 2- or 4-wire transmitters
● With a built-in resistor, measuring the current without external resistor
● Changeable sampling rate
● Open wire detection
● 4 kV ESD protection
● 2500 VDC intra-module isolation
● Operating temperature range: -25 °C ~ +75 °C

Modbus/HART Gateway

 

● Support HART Short/Long frame
● Support HART Burst mode
● Allow two HART Masters
● Support Modbus RTU and ASCII format
● Support Modbus Slave mode
● Isolated COM 1: RS-232/422/485
● Provide LED indicators
● Built-in Watchdog
● DIN-Rail Mountable

 

9 artikel(en)
  • Deskundig advies
  • Flexibiliteit
  • Oplossingen
Advies nodig?