ICPDAS ET-7252

Levertijd:
2~7 dagen
SKU
ET-7252

Ethernet I/O Module with 2-port Ethernet Switch and 8 channel Digital In and Out

● Built-in Web Server
● Web HMI
● Support for both Modbus TCP and Modbus UDP Protocols
● Communication Security
● Dual Watchdog
● Wide Operating Temperature Range: -25 ~ +75°C
● I/O Pair Connection
● 8 channel Digital In / Counter
● 8 channel Digital Out

 

 

The ET-7252, Ethernet I/O Module, provides 8 wet contact digital input channels and 8 source-type digital output channels. It features optical isolation for 2500 VDC of transient overvoltage protection but doesn’t provide channel-to-channel isolation.

Each input channel can be used as a 32-bit counter and each output channel can drive 650 mA load. The power-on value and safe value of digital output channel are programmable. It can safely be used in applications where hazardous voltages are present.

Meer informatie
Art.nr.
ET-7252
Fabrikant
ICPDAS
Software
Built-In Web Server Yes
Web HMI Yes
I/O Pair Connection Yes
Communication
Ethernet Port 10/100 Base-TX with Auto MDI/MDI-X
Protocol Modbus/TCP, Modbus/UDP
Security ID, Password and IP Filter
Dual Watchdog Yes, Module (0.8 seconds), Communication (Programmable)
Digital Input/Counter
Digital Input/Counter
Channels 8
Contact Wet Contact
Sink/Source (NPN/PNP) Sink/Source
On Voltage Level +10 VDC ~ +50 VDC
Off Voltage Level +4 VDC Max.
Input Impedance 10 kΩ
Counters Max. Count 4,294,967,295 (32 bits)
Max. Input Frequency 100 Hz
Min. Pulse Width 5 ms
Overvoltage Protection +70 VDC
Digital Output
Digital Output
Channels 8
Type Isolated Open Collector
Sink/Source (NPN/PNP) Source
Max. Load Current 650 mA/channel at 25°C
Load Voltage +10 VDC ~ +40 VDC
Overvoltage Protection 47 VDC
Overload Protection -
Short-circuit Protection Yes
Power-on Value Yes, Programmable
Safe Value Yes, Programmable
2-Way Isolation
Ethernet 1500 VDC
I/O 2500 VDC
EMS Protection
ESD (IEC 61000-4-2) 4 kV Contact for each terminal and 8 kV Air for random point
EFT (IEC 61000-4-4) ±4 kV for Power
Surge (IEC 61000-4-5) ±4 kV for Power
LED Indicators
L1 System Running
L2 Ethernet Link/Act
L3 Ethernet 10/100 M Speed
Power
Reverse Polarity Protection Yes
Powered from Terminal Block Yes, 12 ~ 48VDC
Powered from PoE -
Consumption 3.8 W
Mechanical
Dimensions (w x l x h) 72 x 123 x 35mm
Installation DIN-Rail or Wall Mounting
Omgeving
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -30 °C ~ +80 °C
Humidity 10 ~ 90% RH, non-condensing
Mijn vraag gaat over: ICPDAS ET-7252
U bent wellicht ook geïnteresseerd in de volgende producten:
To Top