Hardware

HardwareLees meer

De data acquisitie systemen van Dataq Instruments verbinden bijna ieder analoog signaal met computers. Denk hierbij aan: AC volts, DC volts (meetbereiken van 10 mV to 1000 Volt), Biopotentialen, temperatuur, druk, rek, freqentie, proces stromen, etc. Signalen worden gedigitaliseerd en beschikbaar gemaakt in de computer (vaste en mobiele toepassingen). Data acquisitie meetfrequenties van <1 tot 500,000 samples per seconde.
1-20 van 130
Pagina
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Dataq DI-4208 High-speed USB Data Acquisition with Anti-alias filters

● 
8 armored analog differential inputs
● Programmable ranges: ±2, ±2, ±5, ±10, ±50, ±100 V full scale
● Up to ±120 V without damage
● Adaptable low-pass filter per channel
● Corner frequency set as a function of sampling rate
● 16-bit analog-to-digital resolution
● Up to 160 kHz sample throughput rate
● 7 digital I/O ports (Programmable per port as input or switch)
● Support for rate measurements to 50 kHz
● Support for 16-bit counter
● Supports ChannelStretch™ multi-unit synchronization:
● External trigger input
● Wide-ranging software support includes:
● Ready-to-run WinDaq software
● .Net Classes for Visual Studio program development
● Published protocol for software development in non-Windows operating systems

Dataq DI-4108 High-speed USB Data Acquisition with Anti-alias filters

● 
8 armored analog differential inputs 
● Programmable ranges: ±200 mV, ±500 mV, ±1 V, ±2 V, ±5V, ±10 V full scale
● Up to ±120 V without damage
● Adaptable low-pass filter per channel
● Corner frequency set as a function of sampling rate
● 16-bit analog-to-digital resolution
● Up to 160 kHz sample throughput rate
● 7 digital I/O ports (Programmable per port as input or switch)
● Support for rate measurements to 50 kHz
● Support for 16-bit counter
● Supports ChannelStretch™ multi-unit synchronization:
● External trigger input
● Wide-ranging software support includes:
● Ready-to-run WinDaq software
● .Net Classes for Visual Studio program development
● Published protocol for software development in non-Windows operating systems

Low Cost, Compact USB Data Acquisition Starter kit, 4 analog channels and a full scale range of ±2.5 to ±100 Volts.

● Low-cost, Compact USB Data Acquisition Starter Kit
● Four Differential Analog Inputs
● ±2.5 to ±100 Volts full scale range
● 14-bit Resolution
● Supports ChannelStretch™ multi-unit synchronization
● Up to 160 kHz Sample Rate
● 7 Digital Ports
● Provided with WinDaq/Lite Software

8-channel USB Data Acquisition Starter Kit

● 
Eight Analog Input Channels
● Differential Analog Input Configuration
● Up to ±100 V without damage
● 12-bit Measurement Resolution
● Armored Inputs Absorb Mistakes
● 160 kHz Analog Channel Sample Rate
● 7 Digital Ports
● USB-powered
● Comprehensive Programming Support
● Ready-to-run Software Support

High-speed, 16-bit, Expandable USB Data Acquisition

● 
Eight armored analog differential inputs
 ±2.5, ±5, ±10, 0-5, 0-10 Volts
Up to ±300 V without damage

● Up to 160 kHz sample throughput rate
● Supports ChannelStretch™ multi-unit synchronization 
- Up to sixteen instruments
- Up to 480 kHz throughput
- Up to 128 analog channels and 112 digital ports

● Seven digital I/O ports
Programmable per port as input or switch
Support for frequency measurements to 50 kHz
Support for 16-bit counter

● Wide-ranging software support includes:
- Ready-to-run WinDaq software

Four-channel USB Data Acquisition Starter Kit

● 
Four Analog Input Channels
● Differential Analog Input Configuration
● Enhanced noise immunity, and limited common mode volt tolerance.
● 12-bit Measurement Resolution
● Armored Inputs Absorb Mistakes
● Fast Analog Channel Sample Rate
● Two Digital Input Ports
● Supports 4-20 mA Measurements
● USB-powered
● Comprehensive Programming Support
● Ready-to-run Software Support

Eight-channel, DI-8B module data logger system

● Measures temperature, pressure, flow, current, voltage, and more
● Low-Cost, Portable, USB or Ethernet Data Logger. This product is similar to the DI-710 Series but with Signal Conditioned inputs
● Eight DI-8B signal-conditioned analog inputs
● Stand-alone data logger option allows in-the-field measurements to be saved to Secure Digital Cards (SD)
● 14-bit analog to digital conversion
● Includes WinDaq Software
● Record from as low as 0.0017 Hz to as much as 14,400 Hz
● Wide variety of measurement functions and ranges based on DI-8B module selections

DATAQ Instruments  DI-710 Portable Data Loggers

● Low-Cost, Portable, USB or Ethernet Data Logger or Data Acquisition System
● 16 single-ended, 8 differential analog inputs
● Stand-alone data logger option allows in-the-field measurements to be saved to Secure Digital Cards (SD)
● Built-in Real Time Clock allows automatic time and date stamping of data acquired to SD memory when used in the stand-alone mode
● 14-bit analog to digital conversion
● Includes WinDaq Software
● Record up to 14,400 samples per second with Stand-alone models
● Record up to 4,800 samples per second with PC-connected instruments (WinDaq/HS required)

USB Voltage and TC Data Acquisition

● Eight differential and isolated analog input channels
● Seven bi-directional digital input ports, including:
    - Counter input for totalizing applications
    - Rate input for frequency/flow/rpm applications
● ChannelStretch™ channel expansion to 128 analog and 112 digital channels
● Programmable voltage and thermocouple measurements per channel
● 10 mV to 50 V programmable range per channel in 12 steps
● Programmable support for type J, K, T, B, R, S, E, N thermocouples per channel
● High resolution (16-bit) measurements
● 2000 Hz sample throughput for a single channel and 200 Hz for two or more
● USB interface
● Included WinDaq software for ready-to-run measurements
● Included .NET class
● Fully documented device protocol supports other operating systems

Dataq DI-2108 High-speed USB Data Acquisition with Anti-alias filters

● 
8 armored analog differential inputs
● Fixed measurement range of ±10 V full scale
● Up to ±100 V without damage
● Adaptable anti-alias filter per channel
● Corner frequency set as a function of sampling rate
● Up to 16-bit analog-to-digital resolution
● Up to 160 kHz sample throughput rate
● 7 digital I/O ports (Programmable per port as input or switch)
● Support for frequency measurements to 50 kHz
● Support for 16-bit counter
● External trigger input
● Wide-ranging software support includes:
● Ready-to-run WinDaq software
● .Net Classes for Visual Studio program development
● Published protocol for software development in non-Windows operating systems

Isolated/Universal input, Standalone Multi-Channel Datalogger

● 20 analog input channels, expandable to 200
   ● Programmable per channel
   ● ±20 mV to ±100 V over 12 ranges
   ● Supports direct-connected thermocouples of any type
   ● Supports direct-connected PT100/PT1000 RTDs
   ● Full isolation per channel (60V; see 300V version)
● 4 discrete input channels
   ● Programmable as a group as logic or pulse inputs
   ● Pulse inputs support counter or frequency inputs
● 4 discrete alarm outputs
● Optional WiFi wireless operation
● Flexible triggering
● Built-in, 7-inch display
● Built-in Web server operation for remote operations
● Removable SD memory support up to 32 GB capacity - one (1) 4GB memory card included
● Operates either stand-alone or PC-connected
● PC-side software included

 

Eight-channel Web-based Voltage and Thermocouple Data Logger

● Includes a DI-808 instrument, a screwdriver for signal connections, and an NIST-traceable calibration certificate
● No software to install
● Intelligent data logger with built-in web server works with with any device using a modern web browser
● Stores data locally to internal flash memory or a USB thumb drive and/or remotely to any accessible server or email address
● Allows remote real time display and configuration
● Eight differential and isolated analog input channels programmable as voltage or thermocouple per channel measuring ±10mV, ±25mV, ±50mV, ±100mV, ±250mV,             ±500mV, ±1V, ±2.5V, ±5V, ±10V, ±25V, or ±50V; or Thermocouple types J, K, T, B, R, S, E, or N
● Four pulse input channels programmable as count, frequency, or discrete function per channel
● Four real-time discrete alarm output channels with email/text notification
● Automatic time and date stamping
● Flexible triggering selections start and stop data recording based upon
● Analog and pulse input levels
● Alarm status
● Date/time/day-of-week
● 20 programmable sampling intervals ranging from 25 mS to 1 hour
● 16-bit analog measurement resolution provides even the smallest changes in applied voltage and temperature
● Built-in Ethernet interface

De Graphtec data logger is een robuust systeem dat geschikt is voor spanning, stroom en temperatuur sensoren. Voor het bestellen van een data logger van het merk Graphtec bent u bij Fieldworks Direct B.V. aan het juiste adres. Niet voor niets zijn wij een grote speler als het gaat om industriële ICT-toepassingen. Heeft u interesse in de Graphtec GL240 data logger? Vraag dan meteen uw offerte aan via onze website.

Met een Graphtec data logger haalt u een stukje kwaliteit in huis

Met een data logger van het merk Graphtec weet u altijd dat u kwaliteit in huis haalt. Zo beschikken de Graphtec dataloggers over een duidelijke display die meetwaarden zowel digitaal als in grafiekvorm weergeeft. Hierbij kan de data logger tot wel 10 keer per seconde een meting opslaan. Zo heeft u altijd accurate resultaten en zal geen enkele ontwikkeling onopgemerkt blijven dankzij de Graphtec GL240 data logger of één van de andere dataloggers van dit merk. Verder beschikt de Graphtec GL240 data logger over de volgende specificaties:

● 10 geïsoleerde multifunctionele aansluitingen (voltage, temperatuur of luchtvochtigheid)
● ±20 mV tot ±100 V input over 12 bereiken
● Hoge resolutie 4.3" WQVGA Color TFT scherm
● Eenvoudig keypad systeem
● Inclusief 4 GB SD kaart
● Optionele batterij leverbaar
● Direct data opslag naar een USB-stick
● Verbindt de GL240 met een pc om data uit te lezen of data live te monitoren
● Gratis software om data te bekijken/analyseren

Is een data logger van het merk Graphtec precies waarnaar u op zoek bent? Vraag dan meteen een offerte aan bij Fieldworks Direct B.V. Dit kan via onze website, maar ook telefonisch. U kunt hiervoor bellen naar +31 (0) 73 624 1111. Eerst nog wat vragen over de data loggers die wij verkopen? Of uzelf persoonlijk laten adviseren? Dan kunt u natuurlijk ook altijd even met ons bellen.

Four-channel Voltage and Thermocouple Data Logger

● Four differential and isolated analog input channels
● Programmable voltage and thermocouple measurements per channel
● 10 mV to 50 V programmable range per channel in 12 steps
● Programmable support for type J,K,T,B,R,S,E,N thermocouples per channel
● Sample rate of 2000 Hz for a single channel and 200 Hz throughput for two or more channels
● USB interface
● Included WinDaq software for ready-to-run measurements
● Included .NET class
● Fully documented protocol supports other operating systems

 

LAN-based Event Data Logger

● Measures how long, how many, and when events occur
● Perfect as an OEE (Overall Equipment Effectiveness) data logger
● Adapts to a wide range of signal types
● LAN-based for easy deployment, singularly or in groups
● Includes server-side software to aggregate and report results

Temperature Data Logger

● -10 to +50°C (+14 to +122°F) Measurement Range
● USB Interface for Set-up and Data Download
● 2 User-Programmable Alarm Thresholds
● Bright Red and Green LED Indication
● Replaceable Internal Lithium Battery
● 30-minute fixed sample rate (one sample every 30 min)

 

Data Acquisitie Module met ingebouwde Programmeerbare Logische Controller (PLC) 

● Voordelige Data Acquisitie en besturing 
● Ingebouwde BASIC Programmeertaal 
● Stand-alone of PC-connected werking 
● Ondersteund High- en Low-speed Toepassingen 
● Acht Ingebouwde Analoge Ingangen 
● Vier Ingebouwde Digitale Uitgangen 
● Vier Ingebouwde Digitale Ingangen 
● De Vervanger voor Controllers in Prijs en Complexiteit

Low Cost, Compact USB Data Acquisition Starter kit, 4 analoge ingangen en een ingangsbereik van ±2.5 to ±50 Volts.

● Low-cost, Compact USB Data Acquisition Starter Kit
● Vier Differentiële Analoge Ingangen
● ±2.5 tot ±50 Volts full scale bereik
● 13-bit Resolutie
● Tot 10 kHz Sample Rate
● 4 Digitale Ingangen incl. 1 Counter en 1 Timer
● 4 High Voltage Digitale Uitgangen
● Inclusief WinDaq/Lite Software


LAN-based Temperature and Humidity Data Logger

● Supports Simultaneous WiFi and Hardwired Interfaces
● -25°C to +60°C Standard Temperature Measurement Range
● -200°C to +200°C Measurement Range with Optional Probe
● Combined Temperature/Humidity or Temperature Only measurements on each of Four Ports
● Built-in Web Server Accessible and Configurable via Any Standard Web Browser
● Programmable Alarm Limits Per Channel
● Real Time email Alerts
● Built-in Memory for Stand-alone Operation
● Excel-compatible Format for Easy Analysis and Report Generation


DI-160 geavanceeerde Event, Status en Teller Data Logger

● 8 kanaals data logger voor opname van events, statussen en pulsen
● 4 geïsoleerde kanalen geschikt voor channels ±300V en 230 VAC rms bronnen
● 4 niet-geïsoleerde kanalen voor contacten en to 30V discrete logica
● Opslag van data in universeel CSV (komma-gescheiden waarden) bestandsformaat
● Ingebouwde real time klok
● Opslag naar verwijderbare, SD-style geheugen voor bijna oneindige metingen
● USB interface
● Ingebouwde oplaadbare backup batterij



1-20 van 130
Pagina
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • Deskundig advies
  • Flexibiliteit
  • Oplossingen
Advies nodig?