Wij gebruiken cookies om uw ervaring beter te maken. Om te voldoen aan de cookie wetgeving, vragen we uw toestemming om de cookies te plaatsen. Meer informatie.
ICS GPIB-to-Analog Minibox 4867
Levertijd:
3~4 weken
SKU
4867
ICS GPIB-to-Analog Minibox 4867
● Combines Analog I/O, Digital I/O, Relay drivers and Temperature readings in a ICS Minibox™. Versitile GPIB module controls almost any device.
● 32-line Digital Interface configurable as gated inputs or latched outputs. User configurable to match the application.
● Six Analog Inputs with programmable ranges. Measures up to ±10 VDC.
● Four 0 to 5 VDC Analog Outputs. Controls analog devices.
● High current Relay Drivers sink 300 mA. Drive external relays or use as a digital control line.
● Setup and IDN message saved in Flash memory. Save's your configuration.
● Support includes a menu driven configuration program, Visual Basic and LabView programs. Easy to use, easy to program.
● Companion Terminal Board simplifies test connections. Saves connection time.
The Model 4867 GPIB Data Acquisition and Control Module provides analog and digital signals for controlling virtually any kind of a device and the capability to read back analog voltages, digital signals and temperatures. The ICS GPIB-to-Analog Minibox 4867 is an IEEE-488.2 compatible device and has a SCPI command parser that accepts SCPI and short form commands for ease of programming. Applications include device control, GPIB interfacing and data logging.
The ICS GPIB-to-Analog Minibox 4867 is housed in a small 7 in x 7 in Minibox that can either sit on a bench or be rack mounted in your test system. Analog, digital and thermocouple connections are made via a 62-pin metal-shell connector on the ICS GPIB-to-Analog Minibox 4867. GPIB signals are on a standard GPIB connector. The ICS GPIB-to-Analog Minibox 4867's GPIB address and its configuration settings are set with SCPI commands and saved internally in flash memory. The SCPI comands can also be used to query the current coniguration.
Meer informatie
Art.nr.
4867
Fabrikant
ICS Electronics
Land van herkomst
Verenigde Staten
GPIB Capabilities
| IEEE 488 Bus Interface | The 4867's 488 Bus interface meets IEEE
STD 488.1-1987 and has the following capabilities: |
| Address Capability | Primary address range: 0-30. |
| SRQ Generation | SRQs are generated if the unit is not a talker, if SRQs are enabled and if an Enabled Event Status Register bit change occurs. |
| 488.2 Common Commands | *CLS, *ESE, *ESE?, *ESR?, *IDN?, *OPC, *OPC?, *RCL, *RST, *SAV, *SRE, *SRE?, *STB, TST? and *WAI |
| SCPI Commands | Used to set and query all programmable functions. The 4867 conforms to SCPI 1994.0 Specification. |
Digital I/O
| 32 lines configurable as input or outputs in 8-bit byte increments. | ||||
| Input Logic Levels |
|
|||
| Output Logic Levels |
|
|||
Analog Inputs
| 6 single ended inputs with programmable ranges. | |
| Ranges | ±10, ±5, 0 to +5, 0 to + 10VDC |
| Resolution | 1 part in 12 bits |
| Accuracy | 4 bits |
| Offset | 5 bits (Zero and endpoints) |
| Scaling | Offset and gain |
| Scan Rate | 50 samples/sec. |
| Averaging | 1 to 100 samples |
| Response | 8.5 ms after terminator |
Analog Outputs
| 4 outputs with common ground. | |
| Vout | 0 to 4.99 VDC (Limited to Vcc-30 mV) |
| Resolution | 1 part in 10 bits (4.88 mV) |
| Accuracy | 2 bits (Non-linearity) |
| Offset | 4 bits (Zero and endpoint) |
| Load | 5 kΩ max. |
| Scaling | Offset and Gain |
| Update | 8 ms after terminator |
Driver Outputs
|
|||||||||
Temperature Measurements
|
|||||||||||
Diagnostic Indicators
|
|||
Grootte
139.7 x 114.3 x 12.7mm (l x w x h)
Connectors and Headers
|
|||||||
Omgeving
|
|||||||
Power
9 to 32 VDC at 2 VA
Included Accessories
|
|||||