ICPDAS PISO-DNS100U-T

Levertijd:
2~7 dagen
SKU
PISO-DNS100U-T

1 Port Intelligent DeviceNet Multi-Slave Board

 

● DeviceNet Version: Volume I & II, Release 2.0
● Programmable Slave MAC ID and Baud Rate
● Baud Rate: 125K, 250K, 500K
● Support Group 2 only Server
● I/O Operating Modes: Poll, Bit-Strobe, Change of State / Cyclic
● I/O Length: 512 Bytes max (Input/Output) per slave
● Slave Node : 10(max) nodes inside the board
● Not Support UCMM.
● LED : Status , ERR

 

The PISO-CPM100 gives a very powerful and economic solution of an active CANopen master device with one CAN channel. It uses the NXP SJA1000T and 82C250 to be the CAN controller and transceiver, which provide bus arbitration, error detection with auto correction and re-transmission function. The 16-bit on-board microcontroller with real-time O.S., MiniOS7, allows many features, such as real-time message transmission and reception, filtering, preprocessing, and storage of CAN messages. Under the effect of the powerful microcontroller, this card can be made for one CAN controller manager without losing data, even in systems with a high PCI bus load. Therefore, the CANopen critical process can be implemented directly by CANopen firmware in the PISO-CPM100. In addition, users can develop their CANopen application by using the CANopen library on the host computer. When the PISO-CPM100 is active, the data exchange between users’ application and CANopen firmware is performed via the memory mapping method of the PISO-CPM100.


https://fieldworks.nl/media/imageproducts/icpdas/piso-dns100_1.jpg

 

APPLICATIONS:

● Industrial Machinery
● Building Automation
● Medical
● Maritime
● Restaurant Appliances
● Laboratory Equipment & Research


https://fieldworks.nl/media/imageproducts/icpdas/piso-dns100_2.jpg

https://fieldworks.nl/media/imageproducts/icpdas/piso-dns100_2.jpg

 

VIRTUAL SLAVE CONCEPT:

https://fieldworks.nl/media/imageproducts/icpdas/piso-dns100_4.jpg

 

TOOLKIT:

The software utility includes various useful functions. These functions help users to manage and configure the DeviceNet virtual slave devices. It helps the users to develop the DeviceNet virtual slave station projects easily and quickly. The users can also develop another toolkit on your own purpose.


https://fieldworks.nl/media/imageproducts/icpdas/piso-dns100_5.jpg

 

LABVIEW TOOL:

In order to apply the PISO-DNS100 to DeviceNet network with NI LabVIEW, we provides a LabVIEW 8.0 toolkit for the purpose. It is a useful tool to develop the DeviceNet Slave application in NI LabVIEW environment by using PISO-DNS100. It is easy to use and can help user to rapidly reduce their program development cycle.


https://fieldworks.nl/media/imageproducts/icpdas/piso-dns100_5.jpg

 

ESTABLISH CONNECTION FLOWCHART:

 

https://fieldworks.nl/media/imageproducts/icpdas/piso-dns100_7.jpg

The PISO-CPM100 gives a very powerful and economic solution of an active CANopen master device with one CAN channel. It uses the NXP SJA1000T and 82C250 to be the CAN controller and transceiver, which provide bus arbitration, error detection with auto correction and re-transmission function. The 16-bit on-board microcontroller with real-time O.S., MiniOS7, allows many features, such as real-time message transmission and reception, filtering, preprocessing, and storage of CAN messages. Under the effect of the powerful microcontroller, this card can be made for one CAN controller manager without losing data, even in systems with a high PCI bus load. Therefore, the CANopen critical process can be implemented directly by CANopen firmware in the PISO-CPM100. In addition, users can develop their CANopen application by using the CANopen library on the host computer. When the PISO-CPM100 is active, the data exchange between users’ application and CANopen firmware is performed via the memory mapping method of the PISO-CPM100.

https://www.icpdas.com/products/Remote_IO/can_bus/piso-cpm-dnm100/piso-cpm100(1).jpg



APPLICATIONS

● Industrial Machinery
● Building Automation
● Medical
● Maritime
● Restaurant Appliances
● Laboratory Equipment & Research

https://www.icpdas.com/products/Remote_IO/can_bus/piso-dns100/Application%20of%20Function%20Test.jpg

https://www.icpdas.com/products/Remote_IO/can_bus/piso-dns100/Application%20of%20Vision%20Inspection.jpg

VIRTUAL SLAVE CONCEPT

https://www.icpdas.com/products/Remote_IO/can_bus/piso-dns100/slave_concept.jpg


TOOLKIT

The software utility includes various useful functions. These functions help users to manage and configure the DeviceNet virtual slave devices. It helps the users to develop the DeviceNet virtual slave station projects easily and quickly. The users can also develop another toolkit on your own purpose.

https://www.icpdas.com/products/Remote_IO/can_bus/piso-dns100/software_toolkit.jpg


LABVIEW TOOL

In order to apply the PISO-DNS100 to DeviceNet network with NI LabVIEW, we provides a LabVIEW 8.0 toolkit for the purpose. It is a useful tool to develop the DeviceNet Slave application in NI LabVIEW environment by using PISO-DNS100. It is easy to use and can help user to rapidly reduce their program development cycle.

https://www.icpdas.com/products/Remote_IO/can_bus/piso-dns100/LabVIEW8_DNS100.jpg


ESTABLISH CONNECTION FLOWCHART

https://www.icpdas.com/products/Remote_IO/can_bus/piso-dns100/flowchart.jpg
Meer informatie
Art.nr.
PISO-DNS100U-T
Fabrikant
ICPDAS
Bus Interface
Type Universal PCI supports both 5 V and 3.3 V PCI bus
Board No. By DIP switch
CAN Interface
Controller
NXP SJA1000T with 16 MHz clock
Microprocessor inside with 80186 80MHz
Transceiver NXP 82C250
Channel Number 1
Connector 5-pin screwed terminal block (CAN_L, CAN_SHLD, CAN_H, N/A for others)
Baud Rate (bps) 125 k, 250 k, 500 k
Transmission Distance Depend on baud rate (for example, max. 1000 m at 50 kbps)
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminator Resistor Jumper for 120 Ω terminator resistor
Specification ISO-11898-2, CAN 2.0A and CAN 2.0B
Protocol DeviceNet Volumn I v2.0, Volumn II v2.0
LED Indicators
Round LED Status LED, ERR LED
Software
Driver Windows 2K/XP
Library VB 6.0, VC++ 6.0, BCB 6.0
Power
Power Consumption 300 mA @ 5 V
Mechanical
Dimensions (w x h) 127 x 121mm
Omgeving
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -40 °C ~ +80 °C
Humidity 5 ~ 95% RH, non-condensing
Mijn vraag gaat over: ICPDAS PISO-DNS100U-T
To Top