ICPDAS NS-206FCS

Levertijd:
2~7 dagen
SKU
NS-206FCS

Unmanaged 4-Port Industrial 10/100 Base-T(X) with Dual 100 Base-FX Switch

 

● Automatic MDI / MDI-X crossover for plug-and-play
● Each port supports both 10/100 Mbps speed auto negotiation
● Store-and-forward architecture
● Full duplex IEEE 802.3x and half duplex backpressure flow control
● 1.6 Gbps high performance memory bandwidth
● Frame buffer memory: 256 Kbit
● Integrated look-up engine with dedicated 1 K unicast MAC addresses
● Supports +10 ~ +30 VDC voltage
● Supports operating temperatures from 0 °C ~ +70 °C
● DIN-Rail Mounting for industrial usage

 

The NS-206FCS (SC Connector; Single-mode) is a Unmanaged 4-Port Industrial 10/100 Base-T(X) with Dual 100 Base-FX Switch that secures data transmission by using fiber optic transmission to provide immunity from EMI/RFI interference. It is used Ethernet for transmitting a signal up to 15 Km, and is the perfect solution for applications where transmission must be protected from electrical exposure, surges, lightning or chemical corrosion.

The NS-206FCS operates at full duplex mode. In full duplex mode, range is 15 km with 8.3/125, 8.7/125, 9/125 or 10/125 μm fiber cables.

The NS-206FCS can extend your LAN in a daisy chain configuration. Please refer to Hardware.The Ethernet supports 10/ 100M auto-negotiation feature and auto MDI / MDIX function.

Meer informatie
Art.nr.
NS-206FCS
Fabrikant
ICPDAS
Technology
Standards IEEE802.3, 802.3u, 802.3x
Processing Type Store & forward wire speed switching - no delays
MAC Addresses 1024
Memory Bandwidth 1.6 Gbps
Flow Control IEEE802.3x flow control, back pressure flow control
Interface
RJ45 port 10/100BaseT(X) auto negotiation speed, F/H duplex mode,
and auto MDI/MDIX connection
Fiber Optic port 100 Base-FX (Single-mode; SC connector)
LED Indicators 10/100M, Link/Act, Full duplex/Half duplex (Fiber Port)
Ethernet Isolation 1500 Vrms 1 minute
Frame Ground for EMS Protection Yes
Fiber Optic
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance: 15 km, (9/125 μm recommended) for full duplex
Wavelength: 1300 or 1310 nm
Min. TX Output: -15 dBm
Max. TX Output: -8 dBm
RX Sensitivity: -36 to -31 dBm
Ethernet Transmission Distance
Ethernet: 2-pair UTP/STP Cat.3,4,5, EIA/TIA-568 100 Ω
Fast Ethernet: 2-pair UTP/STP Cat. 5, EIA/TIA-568 100 Ω
Power
Redundant Input Range +10 ~ +30 VDC (Non-isolation)
Alarm Contact One relay output with current carrying capacity of 2 A@30 VDC
Power consumption 0.24 A@24 VDC, ±5% arrowed with 100M Full duplex
LED Indicators Power input1, Power input2, Power fail
Protection Power reverse polarity protection
Frame Ground for EMS Protection Yes
Connection 7-Pin Removable Terminal Block
Mechanical
Case Metal
Environmental rating IP20
Dimensions (w x h x d) 72.5 x 110 x 102mm
Installation DIN-Rail or Wall Mounting
Environmental
Operating Temperature 0 °C ~ +70 °C
Storage Temperature -20 °C ~ +85 °C
Humidity 10% ~ 90% non-condensing
Mijn vraag gaat over: ICPDAS NS-206FCS
To Top