ICPDAS NS-206FC

Levertijd:
2~7 dagen
SKU
NS-206FC

Unmanaged 4-Port Industrial 10/100 Base-T(X) with Dual 100 Base-FX Switch

 

● Automatic MDI / MDI-X crossover for plug-and-play
● Each port supports both 10/100 Mbps speed auto negotiation
● Store-and-forward architecture
● Full duplex IEEE 802.3x and half duplex backpressure flow control
● 1.6 Gbps high performance memory bandwidth
● Frame buffer memory: 256 Kbit
● Integrated look-up engine with dedicated 1 K unicast MAC addresses
● Supports +10 ~ +30 VDC voltage
● Supports operating temperatures from 0 °C ~ +70 °C
● DIN-Rail Mount for industrial usage

 

The NS-206FC (SC Connector; Multi-mode) is a Unmanaged 4-Port Industrial 10/100 Base-T(X) with Dual 100 Base-FX Switch that secures data transmission by using fiber optic transmission to provide immunity from EMI/RFI interference. It is used Ethernet for transmitting a signal up to 2 km (6.600 ft), and is the perfect solution for applications where transmission must be protected from electrical exposure, surges, lightning or chemical corrosion.

The NS-206FC operates at either half or full duplex mode. In full duplex mode, range is 2 km with 62.5/ 125 μm fiber cables; in half duplex mode, range is 412m with 62.5/ 125 μm fiber cables.

The NS-206FC can extend your LAN in a daisy chain configuration. Please refer to Hardware.The Ethernet supports 10/ 100M auto-negotiation feature and auto MDI /MDIX function.

Meer informatie
Art.nr.
NS-206FC
Fabrikant
ICPDAS
Technology
Standards IEEE802.3, 802.3u, 802.3x
Processing Type Store & forward wire speed switching - no delays
MAC Addresses 1024
Memory Bandwidth 1.6 Gbps
Flow Control IEEE802.3x flow control, back pressure flow control
Interface
RJ45 Port 10/100BaseT(X) auto negotiation speed, F/H duplex mode,
and auto MDI/MDIX connection
Fiber Optic Port 100 Base-FX (Multi-mode; SC connector)
LED Indicators 10/100M, Link/Act, Full duplex/Half duplex (Fiber Port)
Ethernet Isolation 1500 Vrms 1 minute
Frame Ground for EMS Protection Yes
Fiber Optic
Multi mode fiber cables: 50/125, 62.5/125 or 100/140 μm
Distance: 2 km, (62.5/125 μm recommended) for full duplex
Wavelength: 1300 or 1310 nm
Min. TX Output: -20 dBm
Max. TX Output: -14 dBm
RX Sensitivity: -34 to -31 dBm
Ethernet Transmission Distance
Ethernet: 2-pair UTP/STP Cat.3,4,5, EIA/TIA-568 100 Ω
Fast Ethernet: 2-pair UTP/STP Cat. 5, EIA/TIA-568 100 Ω
Power
Input Voltage Range +10 ~ +30 VDC (Non-isolation)
Power Consumption 0.24 A@24 VDC, ±5% arrowed with 100 m Full duplex
LED Indicator Yes
Protection Power reverse polarity protection
Frame Ground for EMS Protection Yes
Connection 5-Pin Removable Terminal Block
Mechanical
Casing Plastic
Flammability UL 94V-0
Dimensions (w x h x d) 64 x 110 x 98mm
Installation DIN-Rail Mount
Environmental
Operating Temperature 0 °C ~ +70 °C
Storage Temperature -20 °C ~ +85 °C
Humidity 10% to 90% non-condensing
Mijn vraag gaat over: ICPDAS NS-206FC
To Top