Wij gebruiken cookies om uw ervaring beter te maken. Om te voldoen aan de cookie wetgeving, vragen we uw toestemming om de cookies te plaatsen. Meer informatie.
ICS GPIB-to-Daq Card 4807
Levertijd:
3~4 weken
SKU
4807
GPIB Data Acquisition and Control Board
● Combines Analog I/O, Digital I/O, Relay drivers and Temperature readings on one small board. Versitile GPIB board controls almost any device.
● 32-line Digital Interface configurable as gated inputs or latched outputs. User configurable to match the application.
● Six Analog Inputs with programmable ranges. Measures up to ±10 VDC signals.
● Four 0 to 5 VDC Analog Outputs. Controls analog devices.
● High current Relay Drivers sink 300 mA. Drive external relays or use as a digital control line.
● Setup and IDN message saved in Flash memory. Customize the board as part of your product.
● Support includes a menu driven configuration program, Visual Basic and LabView programs. Easy to use, easy to program.
● Companion Terminal Board simplifies test connections. Saves connection time.
The Model 4807 GPIB Data Acquisition and Control Board provides analog and digital signals for controlling virtually any kind of a device and the capability to read back analog voltages, digital signals and temperatures. The 4807 is an IEEE-488.2 compatible device and has a SCPI command parser that accepts SCPI and short form commands for ease of programming. Applications include device control, GPIB interfacing and data logging.
The 4807 is fabricated on a small 4.5 in x 5.5 in board that easily mounts on any panel or other surface in the host chassis. Analog, digital and thermocouple connections are made via a 62-pin metal-shell connector on the 4807. GPIB signals and address switch inputs are on a 26-pin header. The header mates with ICS's GPIB Connector/Switch assemblies which mount a GPIB Connector and an Address switch on the rear panel of the host chassis. The 4807 is powered by +5 volt power supply.
All of the I/O configuration settings can be changed with SCPI commands and are saved in the 4807's internal flash memory.
Meer informatie
Art.nr.
4807
Fabrikant
ICS Electronics
Land van herkomst
Verenigde Staten
GPIB Capabilities
| IEEE 488 Bus Interface |
|
||
| Address Capability | Primary address range: 0-30. | ||
| SRQ Generation | SRQs are generated if the unit is not a talker, if SRQs are enabled and if an Enabled Event Status Register bit change occurs. | ||
| 488.2 Common Commands | *CLS, *ESE, *ESE?, *ESR?, *IDN?, *OPC, *OPC?, *RCL, *RST, *SAV, *SRE, *SRE?, *STB, TST? and *WAI | ||
| SCPI Commands | Used to set and query all programmable functions. The 4807 conforms to SCPI 1994.0 Specification. |
Digital I/O
| 32 lines configurable as input or outputs in 8-bit byte increments. | ||||
| Input Logic Levels |
|
|||
| Output Logic Levels |
|
|||
Analog Inputs
| 6 single ended inputs with programmable ranges. | |||
| Ranges | ±10, ±5, 0 to +5, 0 to + 10VDC | ||
| Resolution | 1 part in 12 bits | ||
| Accuracy | 4 bits | ||
| Offset | bits (Zero and end points) | ||
| Scaling | Offset and gain | ||
| Scan Rate | 50 samples/sec. | ||
| Averaging | 1 to 100 samples | ||
| Response | 8.5 ms after terminator | ||
| Signal Z |
|
||
Analog Outputs
| 4 outputs with common ground. | |
| Vout | 0 to 4.99 VDC (Limited to VCC-30 mV) |
| Resolution | 1 part in 10 bits (4.88 mV) |
| Accuracy | 2 bits (Non-linearity) |
| Offset | 4 bits (Zero and end point) |
| Load | 5 kΩ maximum |
| Scaling | Offset and Gain |
| Update | 8 ms after terminator |
Driver Outputs
| 6 open collector relay drivers | |
| Imax | 300 mA |
| Vmax | 48 VDC |
| Response | 2 ms after terminator |
Temperature Measurements
| Four type J thermocouple inputs | |
| Range | -100 °C ~ + 400 °C |
| Resolution | 0.1 °C |
| Accuracy | ±2 °C exclusive of thermocouple error |
| Filter | 1 to 100 samples |
Controls and Indicators
| Diagnostic Indicators | |
| Six on board LEDs | PWR, RDY, MTA, MLA, SRQ and ERR. |
Grootte
139.7 x 114.3 x 12.7mm (l x w x h)
Connectors and Headers
| GPIB | 26-pin (2 row x 13 pin) header |
| Data | 62-pin DC shell female connector |
| Power | 2 screw terminals |
Omgeving
| Operating Temperature | -10 °C ~ +70 °C |
| Storage Temperature | -20 °C ~ +85 °C |
| Humidity | 0-90% RH, no condensation |
Power
+5 ± 0.2 VDC@ 400 mA (typical)
Included Accessories
| Instruction Manual |
| Configuration Disk with configuration programs and sample Visual Basic program. |
| 62-pin mating connector and hood |