Zoekresultaten voor: ‘brands industrial automation i’

RS-422 and RS-485 Lightning/Surge Protector

● Triple Stage Protection
● Fast Response Time for RS-422 / RS-485
● Prevents Damage to Modems, Converters, and Terminals
● Accommodates Data Rates to 10 Mbps
● Supports 4 Circuits

Smart GPIB to Serial Interface Board

● Combines IEEE-488.2 responses and a smart GPIB-to-serial conversion path in one unit. Adds an IEEE-488.2 compatible GPIB interface to any RS-232 or RS-422/485 serial device.
● Provides all IEEE-488.2 functions and the Status Reporting Structure. Easiest way to add IEEE-488.2 capability to any serial device.
● Smart transparent serial data up to 57.6 Kbaud. Does not require escape sequences or a second GPIB address.
● SCPI commands set serial configuration, GPIB address and IDN message. Easy setup customizes the 4816 for the application.
● Operates on 5 to 15 Volts. Works from almost any DC power source.
● Includes Diagnostic LEDs. Provides visual indication of unit's operation, address, and selftest status.
● Support includes menu driven configuration program and GPIBkybd. The easy way to configure the interface or use the programs as examples.

Smart GPIB to Serial Interface Board

● Combines IEEE-488.2 responses and a smart GPIB-to-serial conversion path in one unit. Adds an IEEE-488.2 compatible GPIB interface to any RS-232 or RS-422/485 serial device.
● Provides all IEEE-488.2 functions and the Status Reporting Structure. Easiest way to add IEEE-488.2 capability to any serial device.
● Smart transparent serial data up to 57.6 Kbaud. Does not require escape sequences or a second GPIB address.
● SCPI commands set serial configuration, GPIB address and IDN message. Easy setup customizes the 4816 for the application.
● Operates on 5 to 15 Volts. Works from almost any DC power source.
● Includes Diagnostic LEDs. Provides visual indication of unit's operation, address, and selftest status.
● Support includes menu driven configuration program and GPIBkybd. The easy way to configure the interface or use the programs as examples.

IEC61850/IEEE1613 Hardened 10/100BASE-TX to 100BASE-FX Media Converter

● Complies with IEC61850 EMC and environment requirement, and IEEE1613 standard for substation and power automation
● Complies with EN50121-4 environmental requirement for for railway applications
● Complies with NEMA TS1 & TS2 environmental requirements for traffic control equipment
● DIP switch configuration for "Link-Fault-Pass-Through", link down alarm, speed, duplex mode
● 768K bits buffer memory
● 10/100Mbps-full/half-duplex, auto-negotiation, auto-MDI/MDIX
● Full wire-speed forwarding rate
● Alarms for power and port link failure by relay output
● Redundant power inputs with terminal block and DC jack
● -40°C to 75°C operating temperature range
● Hardened aluminum case
● Supports DIN-rail, panel or rack mounting installation

1 port RS-232 Bluetooth serial adapter

● Selectable as Slave or Master mode
● Bluetooth v2.0 EDR compliant
● Bluetooth Class 1
● Up to 300 ft. range

Unmanaged 8-Port Industrial 10/100 Base-T to 100 Base-FX Fiber Optics Converter

● Automatic MDI / MDI-X crossover for plug-and-play
● Each port supports both 10/100 Mbps speed auto negotiation
● Store-and-forward architecture
● Full duplex IEEE 802.3x and half duplex backpressure flow control
● 3.2 Gbps high performance memory bandwidth
● Integrated look-up engine with dedicated 1 K unicast MAC addresses
● Supports +10 ~ +30 VDC voltage
● Supports operating temperatures from 0 °C ~ +70 °C
● DIN-Rail Mounting for industrial usage

Unmanaged 8-Port Industrial 10/100 Base-T to 100 Base-FX Fiber Optics Converter

● Automatic MDI / MDI-X crossover for plug-and-play
● Each port supports both 10/100 Mbps speed auto negotiation
● Store-and-forward architecture
● Full duplex IEEE 802.3x and half duplex backpressure flow control
● 3.2 Gbps high performance memory bandwidth
● Integrated look-up engine with dedicated 1 K unicast MAC addresses
● Supports +10~+30Vdc voltage
● Supports operating temperatures from 0 °C ~ +70 °C
● DIN-Rail mountable for industrial usage

Unmanaged 8-Port Industrial 10/100 Base-T to 100 Base-FX Fiber Optics Converter

● Automatic MDI / MDI-X crossover for plug-and-play
● Each port supports both 10/100 Mbps speed auto negotiation
● Store-and-forward architecture
● Full duplex IEEE 802.3x and half duplex backpressure flow control
● 3.2 Gbps high performance memory bandwidth
● Integrated look-up engine with dedicated 1 K unicast MAC addresses
● Supports +10~+30Vdc voltage
● Supports operating temperatures from 0 ~ +70°C
● DIN-Rail Mount for industrial usage

USB to RS-232 Converter

● Fully Compliant with the USB 1.1/2.0 (High Speed)
● No External Power Supply is required as the I-7560 is powered from the USB Bus
● Baud Rate, 300 ~ 115200 bps
● Operating Temperatures, -25 °C ~ +75 °C 
● Driver Supports Windows 7/10 64-bit / Linux

USB to Isolated RS-232/422/485 Converter

● Fully Compliant with the USB 1.1/2.0 (High Speed)
● No External Power Supply is required as the I-7561 is powered
● Baud Rate: 300 ~ 115200 bps
● 3000 VDC Isolation Protection on the RS-232/422/485 side 
● ESD Protection for the RS-232/422/485 Data Line
● Operating Temperatures: -25 °C ~ +75 °C
● Driver Supports Windows 7(32/64-bit)/10/2012/Linux
● DIN-Rail Mountable

USB to Isolated RS-485 Active Star Wiring Converter

● Fully Compliant with USB 1.1/2.0 (High Speed)
● No External Power Supply is required as the I-7561 is powered
● RS-485 Active Star Wiring Applications from the USB Bus
● Baud Rate: 300 ~ 115200 bps 
● 3000 VDC Isolation Protection on the RS-485 side
● ESD Protection for the RS-485 Data Line
● Operating Temperatures: -25 °C ~ +75 °C
● Driver Supports Windows 7/10 (32/64-bit)/Linux
● DIN-Rail Mountable

USB to CAN Converter

● Microprocessor inside with 20MHz
● RoHS Design
● Fully compliant with USB 1.1/2.0(Full Speed)
● Fully compatible with the ISO 11898-2 standard
● No external power supply is required as I-7565 takes it's power from the USB bus
● 82C250 CAN transceiver
● Transmission speed up to 1M bps for CAN and 921.6K bps for USB
● Support both CAN 2.0A and CAN 2.0B
● Built-in jumper to select 120 ohm terminal resister
● Power, data flow and error indicator for CAN and USB
● 1000 frames in CAN received buffer

 

High Performance Intelligent USB to CAN Converter

● Fully compliant with USB 1.1/2.0 (Full Speed)
● Fully compatible with the ISO 11898-2 standard
● Support both CAN2.0A and CAN2.0B
● Powered by USB bus
● Integrated with one or two CAN bus channels
● Programmable CAN bus baud rate from 5Kbps to 1Mbps or user-defined baud rate
● Support CAN bus acceptance filter configuration
● Time-stamp of CAN message with at leastI-7565-H1 1 ms precision
● Support firmware update via USB
● Provide API library for users' program development easily

High Performance Intelligent USB to CAN Converter

● Fully compliant with USB 1.1/2.0 (Full Speed)
● Fully compatible with the ISO 11898-2 standard
● Support both CAN2.0A and CAN2.0B
● No external power supply (powered by USB)
● Integrated with one or two CAN bus channels
● Programmable CAN bus baud rate from 5Kbps to 1Mbps or user-defined baud rate
● Support CAN bus acceptance filter configuration
● Time-stamp of CAN message with at least ±1ms precision
● Support firmware update via USB
● Provide API library for users' program development easily

● NMT: Master
● CANopen Version: DS-301 v4.02
● Error Control: Node Guarding protocol
● Allow EMCY receptions
● Provide dynamic PDO functions
● Fully compliant with USB 1.1/2.0 (Full Speed)
● Support SYNC protocol
● Several transmission types of PDO are supported
● Support SDO download/upload segment protocol
● PWR, ACT, ERR, and Tx/Rx LED indicator

USB/DeviceNet Master communication Converter with D-sub 9-pin connector.

● Fully compliant with USB 1.1/2.0 (Full Speed)
● No external power supply is required as I-7565 takes it's power from the USB bus
● DeviceNet Version: Volume I & II, Release 2.0
● Programmable Master MAC ID and Baud Rate
● Baud Rate: 125k, 250k, 500k
● Support Group 2 and UCMM connection
● I/O Operating Modes: Poll, Bit-Strobe, Change of State / Cyclic
● I/O Length: 512 Bytes max (Input/Output) per slave
● Slave Node : 63 nodes max
● Support Auto-Search slave device function

2-Port Isolated Protection CAN Communication Board with 9-Pin D-Sub Connector

● Two independent CAN bus 2.0A/2.0B communication ports
● Compatible with CAN specification 2.0 parts A and B
● On-board optical isolation protection
● Programmable transfer rate up to 1 Mbps
● Jumper select 120Ω terminator resistor for each port
● Direct memory mapping to the CAN controllers
● 33MHz 32bit 5V PCI bus (V2.1) plug and play
● PCI card, supports 5V PCI bus

2-Port Isolated Protection CAN Communication Board with 5-Pin Screw Terminal Connector

● Two independent CAN bus 2.0A/2.0B communication ports
● Compatible with CAN specification 2.0 parts A and B
● On-board optical isolation protection
● Programmable transfer rate up to 1 Mbps
● Jumper select 120Ω terminator resistor for each port
● Direct memory mapping to the CAN controllers
● 33MHz 32bit 5V PCI bus (V2.1) plug and play
● PCI card, supports 5V PCI bus

2-Port Isolated Protection Universal PCI CAN Card with 9-Pin D-Sub Connector

● Two independent CAN bus 2.0A/2.0B communication ports
● Compatible with CAN specification 2.0 parts A and B
● On-board optical isolation protection
● Programmable transfer rate up to 1 Mbps
● Jumper select 120Ω terminator resistor for each port
● Direct memory mapping to the CAN controllers
● 33MHz 32bit 5V PCI bus (V2.1) plug and play
● Universal PCI card, supports both 5V and 3.3V PCI bus

2-Port Isolated Protection Universal PCI CAN Card with 5-Pin Screw Terminal Connector

● Two independent CAN bus 2.0A/2.0B communication ports
● Compatible with CAN specification 2.0 parts A and B
● On-board optical isolation protection
● Programmable transfer rate up to 1 Mbps
● Jumper select 120Ω terminator resistor for each port
● Direct memory mapping to the CAN controllers
● 33MHz 32bit 5V PCI bus (V2.1) plug and play
● Universal PCI card, supports both 5V and 3.3V PCI bus