ICPDAS I-8063

Levertijd:
2~7 dagen
SKU
I-8063

4-channel Isolated Digital Input and 4-channel Relay Output Module

With different communication interface, the I/O modules can be classified to high communication speed (Parallel bus) 8K series modules and low communication speed (serial interface) 87K series modules.

 

There are two types of I/O modules, Parallel and Serial. The parallel modules (I-8 Series) are high-speed modules and support MCU (Main Control Unit) only.
Item I-87K Series
Communication Interface Parallel Bus
Protocol -
Communication Speed Fast
DI with Latched Function -
DI with Counter Input -
Power On Value -
Safe Value -
Programmable Slew-rate for AO Module -

 

High Profile VS Low Profile

With different form factor, I/O modules can be classified to high profile and low profile. Basically, high profile and low profile modules that with same item number also have same I/O channel number.

For example: I-8054 and I-8054W both has 8 DI and 8 DO.

Except I/O channel number, other specifications could be different. You have to double check whether the specifications suit your application.

For example: For I-8054W, its DI logic high level is +10 ~ +50V. But for I-8054, it is +3.5 ~ +30V

Meer informatie
Art.nr.
I-8063
Fabrikant
ICPDAS
Digital Input
Input Channels 4 (Sink/Source)
Input Type Isolation, Differential
On Voltage Level +3.5 V ~ +30 V
Off Voltage Level +1 V max.
Input Impedance 3 kΩ, 0.25 W
Intra-module Isolation, Field to Logic 3750 Vrms
Digital Output
Output Channels 4
Output Type Power Relay, Form C
Operating Voltage Range
5 ~ 110 VAC@0.6 A (47 ~ 63 Hz)
5 ~ 24 VDC@2 A
Relay Contact Voltage Range
0~ 125 VAC@0.6 A (47 ~ 63 Hz)
0~ 30 VDC@2 A
Max. Load Current 2.0 A@65 °C
Max. Operate Time 3 ms max.
Max. Release Time 2 ms max.
Insulation Resistance Min. 100 MΩ, at 500 VDC
Dielectric Strength
Between Open Contacts: 500 Vrms (at 1 Minute)
Between Coil and Contacts: 1000 Vrms (at 1 Minute)
Relay Life
Mechanical: 100,000,000 min.
Electrical: 500,000 min. at 30 VDC@2 A, Resistive
LED Indicators
1 LED Power Indicator
8 LEDs Digital Input and Relay output Indicators
Power
Power Consumption 0.4 A@5 V = 2 W, ±5% for Hardware v2.2
Mechanical
Dimensions (w x l x h) 30 x 88 x 115 mm
Omgeving
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -30 °C ~ +75 °C
Humidity 5 ~ 95% RH, non-condensing
ICPDAS I-8063 aanpassen
Aantal

* Verplichte velden

Uw configuratie
4-channel Isolated Digital Input and 4-channel Relay Output Module (Gray Cover)
ICPDAS I-8063
Overzicht
    Mijn vraag gaat over: ICPDAS I-8063
    To Top