Wij gebruiken cookies om uw ervaring beter te maken. Om te voldoen aan de cookie wetgeving, vragen we uw toestemming om de cookies te plaatsen. Meer informatie.
Signal Conditioning Module DI-8B45
Levertijd:
3~4 weken
SKU
DI-8B45
DI-8B45 Frequency Input Module (0 ~ 100 kHz Input Range)
● Accepts Frequency Input Signals 0 ~ 100 kHz
● TTL or Zero-Crossing Signal Inputs
● High Level Voltage Outputs
● 1500 Vrms Transformer Isolation
● ANSI/IEEE C37.90.1 Transient Protection
● Input Protected up to 240 VAC Continuous
● 100 dB CMR
● 70 dB NMR at 60 Hz
● ±0.05% Accuracy
● ±0.02% Linearity
● Low Drift with Ambient Temperature
● UL, CSA, FM and CE Certifications Pending
● Mix and Match Module Types on Backpanel
DI-8B modules are an optimal solution for monitoring real-world process signals and providing high level signals to a data acquisition system. Each DI-8B45 module isolates and conditions a frequency input signal and provides an analog voltage output.
The frequency input signal can be either a TTL level or zero crossing with as little as ±100mV amplitude. Input circuitry for each signal type has built-in hysteresis to prevent spurious noise from corrupting the module output. TTL signals are applied to the + and - terminals while zero crossing signals are applied to the +EXC and - terminals.
A 5V excitation is available for use with magnetic pick-up or contact closure type sensors. The excitation is available on the -EXC terminal with return on the - terminal.
A special input circuit on the DI-8B45 modules provides protection against accidental connection of power-line voltages up to 240VAC. Clamp circuits on the I/O and power terminals protect against harmful transients.
Isolation is provided by optical coupling to suppress transmission of common mode spikes or surges. The module is powered from +5VDC, ±5%.
The modules are designed for installation in Class I, Division 2 hazardous locations and have a high level of immunity to environmental noise.
Art.nr.
DI-8B45
Fabrikant
Dataq Instruments
Land van herkomst
Verenigde Staten
Input Range
0Hz to 500Hz (DI-8B45-01)
0Hz to 1kHz (DI-8B45-02)
0Hz to 2.5kHz (DI-8B45-03)
0Hz to 5kHz (DI-8B45-04)
0Hz to 10kHz (DI-8B45-05)
0Hz to 25kHz (DI-8B45-06)
0Hz to 50kHz (DI-8B45-07)
0Hz to 100kHz (DI-8B45-08)
0Hz to 1kHz (DI-8B45-02)
0Hz to 2.5kHz (DI-8B45-03)
0Hz to 5kHz (DI-8B45-04)
0Hz to 10kHz (DI-8B45-05)
0Hz to 25kHz (DI-8B45-06)
0Hz to 50kHz (DI-8B45-07)
0Hz to 100kHz (DI-8B45-08)
Output Range
0 to +5V
Excitation Output
+5V at 8mA max
Algemeen
Input Threshold |
|
|||||||||||
Input Hysteresis |
|
|||||||||||
Input Resistance |
|
|||||||||||
Input Protection |
|
|||||||||||
CMV, Input to Output |
|
|||||||||||
CMR (50Hz or 60Hz) | 100dB | |||||||||||
Accuracy² | ±0.05% Span | |||||||||||
Nonlinearity | ±0.02% Span | |||||||||||
Stability |
|
|||||||||||
Noise (Output Ripple) | <10mVp-p at Input >2% Span | |||||||||||
Response Time, 90% Span | 160ms, 80ms, 35ms, 16ms, 8.5ms, 3.4ms, 1.6ms, 0.8ms | |||||||||||
Output Protection (Transient) | ANSI/IEEE C37.90.1 (Continuous Short to Ground) | |||||||||||
Power Supply Voltage | +5VDC ±5% | |||||||||||
Power Supply Current | 45mA | |||||||||||
Power Supply Sensitivity | ±50ppm/% | |||||||||||
Dimensions | 28.1 x 41.9 x 10.2mm | |||||||||||
Operating Temperature | -40ºC to +85ºC | |||||||||||
Storage Temperature | -40ºC to +85ºC | |||||||||||
Humidity | 0 to 95% Noncondensing | |||||||||||
¹240VAC between + and -/+EXC/-EXC terminals. 120VAC between - and +EXC/-EXC terminals and between +EXC and -EXC terminals. | ||||||||||||
²Includes nonlinearity, hysteresis, and repeatability. |