| Transit Drop-Operating |
4' (1.22 m; drop direct to concrete, 26 total drops: one drop to each face, edge and corner. Unit is operating and remains operational. Exceeds MIL-STD-810G, Method 516.6, Proc IV |
| Minimum Integrity Vibration |
Minimum Integrity testing. Unit is not operating. MIL-STD-810G, Method 514.6, Procedure I: Figure 514.6 E-1, Category 24 |
| Vehicle Vibration |
Vehicle vibration testing. Unit is operating. MIL-STD-810G, US Highway Truck, Method 514.6, Procedure I: Figure 514.6 C-1 Category 4. Tablet with xDock and Vehicle Kit |
| Temperature Extremes |
| Operating: -4° F to 140° F (-20° C to 60° C): Cold boot within 15 min (power source). |
| Non-Operating/Storage: -60° F to 160 °F (-51°C to 71°C). |
|
| Thermal Shock |
-60° F to 160° F (-51° C to 71° C). MIL-STD-810G Method 503.5, Procedure II, cyclic: Unit is not operating. |
| Blowing Rain |
4.0 in/hr (101.6 mm/hr) of blowing rain, 40-mph wind source for 30 minutes on each surface. Unit is operating. MIL-STD-810G, Method 506.5, Procedure I |
| Blowing Sand & Dust |
Blowing sand and dust at 30-mph for 30 minutes. Unit is operating. MIL-STD-810G, Method 510.5, Procedures I (Blowing Dust) and II (Blowing Sand) |
| Humidity |
3%-95% - Non-condensing humidity. Five 48-hour cycles. Unit is operating. MIL-STD-810G, Method 507.5, Procedure II |
| Salt Fog Spray |
5% Saline exposure for 2 Cycles x 48 hrs. (24hrs wet/24hrs dry). Unit is not operating. MIL-STD-810G, Method 509.5, Procedure I
|
| Functional Shock |
40g (peak), 11 ms, saw-tooth, 3 axis x 6 shocks = 18 shocks. Unit is not operating. 20g (peak) operating. MIL-STD-810G, Method 516.6, Procedure I
|
| Crash Shock |
75g (peak), 11ms, saw tooth, 2+/- shocks x 3 axis = 6 shocks. Unit is not operating. MIL-STD-810G, Method 516.6, Procedure V |
| Altitude |
Chamber at 40,000 ft for 1 hour. Unit is operating. MIL-STD-810G, Method 500.5, Procedure II |
| Contamination by Fluids |
Detergents, brake fluid, aromatic hydrocarbons. Unit is not operating. MIL-STD-810G, Method 504.1 |
| Fungus |
28 days; US Fungus Types. No growth. Unit is not operating. MIL-STD-810G, Method 508.6, Procedure I |
| Solar Radiation |
Steady State A1. 1120 W/m2 (355 Btu/ft2/hr) UVB @ 500 °C, 7 x2 4hr cycles. Unit is not operating. MIL-STD-810G, Method 505.5-2, Procedure II |
| Ingress Testing |
| IEC (IP) Ingress Protecting Testing |
IP 67 (10-Cell Battery) Dust tight, no ingress of dust. Protection against effects of immersion in water to 3.28' (1m). IEC 60529 IP 67 for dust and water. IP65 with 8-Cell battery option. |
| Hazardous Environments Testing and Certification |
| UL1604/ISA Std 12.12 (CSA 22.1) |
Operation in Hazardous Environments; (Class 1, Division 2, Zones A/B/C/D) |
| ATEX |
Operation in Hazardous Environments; ATEX compliant |
| DC Power, Electrostatic & Environmental |
| DC & Electrostatic |
12-33 VDC for M5 Tablet and Military Vehicle Docking Station (mDock). Per MIL-STD-1275D. 15kV air, 8 kV contact electrostatic discharge per SAE J1113/13, Class A M5 Tablet and Military mDock |
| 461F Emissions |
MIL-STD 461F; CS-101, 114, 115 and 116; CE-102; RE-102; RS-103, 105, and 2169-B |
| Additional Compliance |
| Automotive |
Compliance with latest version of EU Directive 72/245/EEC including amendments and corrigenda (2004/104/EC) Automotive E Mark (mDock) |