Zoekresultaten voor: ‘pd 37’

2-Port Isolated Protection CAN Communication Board with 9-Pin D-Sub Connector

● Two independent CAN bus 2.0A/2.0B communication ports
● Compatible with CAN specification 2.0 parts A and B
● On-board optical isolation protection
● Programmable transfer rate up to 1 Mbps
● Jumper select 120Ω terminator resistor for each port
● Direct memory mapping to the CAN controllers
● 33MHz 32bit 5V PCI bus (V2.1) plug and play
● PCI card, supports 5V PCI bus

2-Port Isolated Protection CAN Communication Board with 5-Pin Screw Terminal Connector

● Two independent CAN bus 2.0A/2.0B communication ports
● Compatible with CAN specification 2.0 parts A and B
● On-board optical isolation protection
● Programmable transfer rate up to 1 Mbps
● Jumper select 120Ω terminator resistor for each port
● Direct memory mapping to the CAN controllers
● 33MHz 32bit 5V PCI bus (V2.1) plug and play
● PCI card, supports 5V PCI bus

2-Port Isolated Protection Universal PCI CAN Card with 9-Pin D-Sub Connector

● Two independent CAN bus 2.0A/2.0B communication ports
● Compatible with CAN specification 2.0 parts A and B
● On-board optical isolation protection
● Programmable transfer rate up to 1 Mbps
● Jumper select 120Ω terminator resistor for each port
● Direct memory mapping to the CAN controllers
● 33MHz 32bit 5V PCI bus (V2.1) plug and play
● Universal PCI card, supports both 5V and 3.3V PCI bus

2-Port Isolated Protection Universal PCI CAN Card with 5-Pin Screw Terminal Connector

● Two independent CAN bus 2.0A/2.0B communication ports
● Compatible with CAN specification 2.0 parts A and B
● On-board optical isolation protection
● Programmable transfer rate up to 1 Mbps
● Jumper select 120Ω terminator resistor for each port
● Direct memory mapping to the CAN controllers
● 33MHz 32bit 5V PCI bus (V2.1) plug and play
● Universal PCI card, supports both 5V and 3.3V PCI bus

PCI Express CAN Communication Card

● PCI Express Interface
● Compatible with CAN 2.0 parts A and B
● Fully compatible with ISO 11898-2 standard
● Support CAN bard from 10K to 1M bps
● 2500Vrms photo couple isolation on the CAN bus
● Universal PCI supports both 5V and 3.3V PCI bus
● Build-in jumper to select 120 ohm terminal resister
● 3KV galvanic isolation
● 2 independent CAN channels
● Direct memory mapping to the CAN controller

PCI Express CAN Communication Card

● PCI Express Interface
● Compatible with CAN 2.0 parts A and B
● Fully compatible with ISO 11898-2 standard
● Support CAN bard from 10K to 1M bps
● 2500Vrms photo couple isolation on the CAN bus
● Universal PCI supports both 5V and 3.3V PCI bus
● Build-in jumper to select 120 ohm terminal resister
● 3KV galvanic isolation
● 2 independent CAN channels
● Direct memory mapping to the CAN controller

Programmable Device Server with 3 RS-232 ports, 1 RS-485 port and an LED Display with Metal Case

● Incorporate Serial Devices in an Ethernet network
● "Virtual COM" Extend COM Ports
● Virtual COM on Windows NT 4.0, 2000/XP/2003 and Vista32
● Powerful Programmable Device Server
● Watchdog Timer suitable for use in harsh environments
● Power Reverse Polarity Protection
● Serial Port ±4 kV ESD Protection Circuit
● Self-Tuner ASIC Controller on the RS-485 Port
● 5-digit LED Display
● Built-in High Performance MiniOS7
● 10/100 Base-TX Ethernet, RJ-45 Port (Auto-negotiating, auto MDI/MDI-X, LED indicator)
● ODM Service Is Available
● Low power consumption
● Palm-Sized with multiple Serial Ports
● Made from fire retardant materials (UL94-V0 Level)
● Supports D/I, Latched D/I and Counter Functions

8-channel Isolated Digital Input and 3-channel AC SSR Output Module with 16-bit Counters

● Input: 8 single-ended
   ON Voltage Level: 4 V ~ 30 V
   OFF Voltage Level: 0 V ~ 1 V
● Input resistance: 3 kΩ
● Isolation voltage: 3750 Vrms
● Output: 3 AC-SSR, Normal open
● Contact rating:
   Load voltage: AC 24 ~ 265 Vrms
   Leakage current: 1.5 mArms
   Max. load current: 1.0 Arms

8-channel DI and 8-channel DO with 32-bit Counters PoE Module

● PoE Ethernet Options
● Built-In Web Server
● Web HMI
● Modbus/TCP, Modbus/UDP Protocol
● Communication Security
● Dual Watchdog
● Operating Temperature: -25 °C ~ +75 °C
● I/O Pair Connection
● Built-In I/O (DI/Counter: 8 Channels, DO: 8 Channels)

● LGA1151 Socket 9th/8th gen Intel® Core™ processor, up to 65W
● NVIDIA® GPU card, up to 125W
● NVIDIA® Tesla T4 GPU Card
● M.2 Key B slot for 5G wireless connection (optional)
● Supports RAID 0,1 (Intel® Q370)
● Supports Power-on delay function
● Supports TPM 2.0
● Supports AMT 12 (Intel® Q370)

● Convert 1-channel 4 ~ 20mA Current Input to 1-channel PWM Output
● PWM output duty ratio converted by 4 ~ 20 mA Input
● PWM output frequency configured via push buttons
● LCD displays the PWM output duty ratio and frequency

● Convert 1-channel 4 ~ 20mA Current Input to 1-channel PWM Output
● PWM output duty ratio converted by 4 ~ 20 mA Input
● PWM output frequency configured via push buttons
● LCD displays the PWM output duty ratio and frequency

● E3827 1.75GHz CPU
● WES7
● Support eLogger HMI
● 64-bit Hardware Serial number for software protection
● Rich I/O Expansion Ability
● Wide Operating Temperature Range: -25 ~ +75°C
● 2x 10/100/1000M Ethernet Ports
● Redundant Power Input

15" XGA TFT Expandable Industrial Touch Panel Computer with 7th/6th Gen Intel® Core™ i7/i5/i3, Celeron® & Pentium® Processor and 1 PCI/PCIe Slot

● 15" XGA TFT LCD display
● LGA1151 socket 7th/6th gen Intel® Core™ i7/i5/i3, Celeron® & Pentium® processors
● Intel® H110 chipset
● Less screw design for easy installation
● 4 USB 3.0, 2 USB 2.0 and 4 COM ports
● One PCIe x4 or one PCIe slot
● Built-in speakers and optional Wi-Fi 802.11 b/g/n module
● Robust IP65 compliant aluminum front bezel
● 5 OSD keys in front panel

● 9th/8th gen Intel® Core™ i7/i5/i3 & Celeron® with Intel® Q370 chipset (Coffee Lake/Coffee Lake Refresh-S)
● 4-CH PoE (IEEE802.3at compliance)
● Dual swappable 2.5" SATA HDD drive bay with RAID 0 &1
● Supports MXM 3.1 type A graphics module (optional)
● Supports Intel® Movidius™ Myriad™ X VPU (optional mPCIe)
● Supports Intel® Distribution of OpenVINO™ toolkit (optional)
● DVI-I, HDMI, and DisplayPort with triple-view supported
● AMS.AXView 3.0 intelligent remote monitoring software for IIoT

ZigBee Repeater

● ISM 2.4 GHz Operating Frequency
● Fully Compliant with 2.4 G (IEEE802.15.4/ZigBee Specifications)
● Fully Compliant with ZigBee ZigBee Pro (ZigBee 2007)
● Wireless Transmission Range up to 700 m
● GUI Configuration Software (Windows Version)
● RS-232/RS-485/Ethernet Interface Supported
● DIN-Rail Mountable

PCI Express/ Universal PCI, 64-channel Optically Isolated Digital Input Board

● Support the +5 V PCI bus for PISO-P64
● Support the +3.3 V/+ 5 V PCI bus for PISO-P64U (-24V)
● Support PCI Express x1 for PEX-P64 (-24V)
● Card ID function for PISO-P64U(-24V) and PEX-P64 (-24V)
● 64-channel optically isolated digital input
● Built-in DC/DC converter providing 3000 VDC isolation
● Four isolated banks when using four isolated external power supplies
● 3750 Vrms photo-isolation protection
● Selectable internal or external power for DI

 

32–channel Optically Isolated Digital Input and 32-channel Optically Isolated Digital Open-collector Output Board

● Support the +5 V PCI bus for PISO-P32C32
● Support the +3.3/+5 V PCI bus for PISO-P32C32U
● Support PCI Express x1 for PEX-P32C32
● 32-channel optically isolated digital input
● 32-channel optically isolated digital output
● Built-in DC/DC converter with 3000 VDC isolation
● Card ID function for PISO-P32C32U(Version 1.1 or above)/PEX-P32C32
● 3750 Vrms photo-isolation protection
● Output status readback for PISO-P32C32U (Version 4.0 or above)/PEX-P32C32

 

PCI Express, 32-ch, 12-bit, 110 kS/s or 44 kS/s Multi-function board

● 12-bit resolution, 100 kS/s high-speed AD converter.
● 32 single-ended/ 16 differential inputs.
● The max. sampling rate is low-gain 110 kS/s or high-gain 44 kS/s.
● PEX-1002L: programmable low gain: 1, 2, 4, 8.
● PEX-1002H: programmable high gain: 1, 10, 100, 1000.
● 16 digital input/16 digital output channels.
● Internal/external trigger.
● Half size board.
● Digital input port can be set to pull-high or pull-low.
● Supports PCI Express x1
● Universal PCI card, supports the +5 V and +3.3 V PCI Bus.