- Serial Connectivity
- Industrial Communication
- Ethernet I/O Modules
- Industrial Switch
- Remote I/O Modules
- Remote I/O Expansion Units
- PACs & Expansion Module
- PC based I/O board
- GPIB - IEEE488.2
- Machine Automation
- Signal Conditioning Modules
- Intelligent Power Meter
- HMI and Touch Monitor
- Industrial Multimedia Association
- Accessoires
Extenders
Point-to-point industrial Ethernet extenders can extend Ethernet connectivity in existing facilities over existing coaxial cable without pulling extra cable. These reliable and rugged devices with wide operating temperature and long MTBF are ideal for building automation, security surveillance, digital signage, factory automation, and intelligent transportation system. In addition, the IP30-rated iCON-3341 series meets NEMA TS1 / TS2 standard for traffic control equipment and IEC61000-6-2 EMC generic standard immunity for industrial environment.
-
EtherWAN Ethernet Extender ED3344
Hardened 10/100Base-TX Ethernet Extender Over Coaxial Cable with M12 Connector
● Complies with NEMA TS1 & TS2 environmental requirements for traffic control equipment
● Compliant EN50121-3-2 EMC requirement
● Complies with IEC61000-6-2 EMC generic standard immunity for industrial environment
● Ethernet port: 10/100Mbps full-duplex, auto-negotiation, auto-MDI/MDIX
● M12 Ethernet port provides strong mechanical secure capacity
● IEEE802.3x flow control for full duplex
● Ten speeds with speed indicator LEDs on front panel of unit
● Ethernet extender port: Symmetrical on the VDSL, high-speed full-duplex up to 85 Mbps communications link over existing coaxial cable (Up to 85 Mbps@about 200 meters (656 ft.), Down to 1 Mbps@about 2,600 meters (8,530 ft.)
● -40°C to +75°C operating temperature range
● Redundant power inputs with terminal block and latched DC jack
● Supports DIP switch to select Local or Remote side
● Supports DIN-Rail panel or rack mounting installation -
EtherWAN Ethernet Extender ED3341
Hardened 10/100Base-TX Ethernet Extender Over Caoaxial Cable
● Complies with NEMA TS1 & TS2 environmental requirements for traffic control equipment
● Complies with IEC61000-6-2 EMC generic standard immunity for industrial environment
● Ethernet port: 10/100 Mbps full-duplex, auto- negotiation, auto-MDI/MDIX
● Ethernet extender port: Symmetrical on the VDSL, high-speed full-duplex up to 85 Mbps communications link over existing coaxial cable
● Ten speeds with speed indicator LEDs on front panel of unit
- Up to 85 Mbps @ about 200 meters
- Down to 1 Mbps @ about 2,600 meters
● -40 °C ~ +75 °C operating temperature range
● Redundant power inputs with terminal block and latched DC jack
● Supports DIP switch to select local or remote side
● Supports DIN-Rail panel or rack mounting installation -
Axiomtek Ethernet Extender iCON-32333
10/100Base-TX Industrial Ethernet Extender over Coaxial Cable with External Power Adapter
● Ethernet port: 10/100 Mbps-full-duplex, auto-negotiation, auto-MDI/MDIX
● Ethernet extender port: Symmetrical on the VDSL, high-speed full-duplex 85Mbps communications link over existing coaxial cable
● -10 °C to +60 °C operating temperature range
● Supports DIP switch to select local or remote site
● Supports DIN-Rail and Wall Mounting installation -
Axiomtek Ethernet Extender iCON-32314
10/100Base-TX Hardened Ethernet Extender over Copper Wire
● Ethernet extender (RJ-11) port: Symmetrical on the VDSL, High-speed full-duplex 50Mbps communications link over existing copper telephone line
● Complies with NEMA TS1 & TS2 environmental requirements for traffic control equipment
● Complies with IEC61000-6-2 EMC generic standard immunity for industrial environment
● Redundant power inputs with terminal block and DC jack
● -40 °C ~ +75 °C operating temperature range
● Supports DIN-Rail or panel mounting installation -
Axiomtek Ethernet Extender iCON-32310
10/100Base-TX Industrial Ethernet Extender over Copper Wire with DIN-rail Mounting Kits and Power Adaptor
● Ethernet extender (RJ-11) port: Symmetrical on the VDSL, high-speed full-duplex 50Mbps communications link over existing copper telephone line
● Ethernet port: 10/100Mbps-full/half-duplex, auto-negotiation, auto-MDI/MDIX
● -20°C to +60°C operating temperature range
● Supports DIP switch to select local or remote site
● Supports DIN-rail or wall mounting installation -
Axiomtek Ethernet Extender iCON-3171
Hardened 10/100Base-TX Managed Ethernet Extender
● Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment
● Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment
● Operates transparent to higher layer protocols such as TCP/IP
● Ethernet Port: 10/100Mbps-full/half-duplex, auto-negotiation, auto-MDI/MDIX
● Ethernet extender (RJ-11 and terminal block) Port: Symmetrical on the VDSL, high-speed full-duplex 50Mbps communications link over existing copper telephone line
● Supports DIP switch to select local or remote side
● Supports DIN-Rail panel rack mounting installation
● Ten speeds with speed indicator LEDs on front panel of unit, Up to 50Mbps@about 300meters. Down to 1Mbps@about 1,900meters
● Supports external hardware watch dog
● Supports Web, CLI, SNMP management interface
● Link Status (for VDSL, Ethernet), get/set IP, get rate, set rate (for CO site), get counter, get SNR (local, remote), SNMP setting (community), system setting, reset to default, F/W upgrade through the management Interface
● Redundant power inputs with terminal block and DC jack
● -40 °C ~ +75 °C operating temperature range
● Hardened aluminum case -
Quatech Serial Extender ETR-RS232
Serial RS-232 Extender over CAT 5
● Compatible with all RS-232 serial products
● Full-duplex data communication
● Sends RS-232 data at 230 kbps up to 1000m
● Real time data transfer with zero software conflicts
● 9 VDC Power Adapter included
● Transfer data or files between PCs and equipment
● One CAT-5 cable extension -
EtherWAN Ethernet Extender ED3141
Hardened 10/100Base-TX Ethernet Extender
● Complies with NEMA TS1 & TS2 environmental requirements for traffic control equipment
● Complies with IEC61000-6-2 EMC generic standard immunity for industrial environment
● Ethernet port: 10/100 Mbps full/Half-duplex, auto-negotiation, auto-MDI/MDIX
● Ethernet extender (RJ-11 and Terminal Block) port: Symmetrical on the VDSL, high-speed full-duplex 50 Mbps communications link over existing copper telephone wire
● Ten speeds with speed indicator LEDs on front panel of unit
- Up to 50 Mbps @ about 300 meters
- Down to 1 Mbps @ about 1,900 meters
● -40 °C ~ +75 °C operating temperature range
● Redundant power inputs with terminal block and DC jack
● Supports DIN-Rail, panel or rack mounting installation










