- Serial Connectivity
- Industrial Communication
- Ethernet I/O Modules
- Industrial Switch
- Remote I/O Modules
- Remote I/O Expansion Units
- PACs & Expansion Module
- PC based I/O board
- GPIB - IEEE488.2
- Machine Automation
- Signal Conditioning Modules
- Intelligent Power Meter
- HMI and Touch Monitor
- Industrial Multimedia Association
- Accessoires
PWM Modules
PWM (Pulse width modulation) is a powerful technique for controlling analog circuits. It uses digital outputs to generate a waveform with variant duty cycle and frequency to control analog circuits. I-8088W and I-87088W have 8 PWM output channels and 8 digital inputs. It can be used to develop powerful and cost effective analog control system.
6 artikel(en)
per pagina
-
ICPDAS CAN-2088D
CAN bus Remote I/O module with CANopen Protocol of 8-Channel PWM and 8-Channel High Speed Counter
● Hardware-controlled PWM output
● PWM output frequency: 0.2 Hz ~ 500 kHz with 0.1%~99.9% duty cycle
● PWM Output Modes: software trigger / hardware trigger
● Trigger each PWM output individually or all PWM outputs synchronously
● Support Burst output mode and Continue output mode
● Provide 32-bit 500 kHz high-speed counter for each DI channel
● Pass the validation of DeviceNet conformance test
● Provide EDS file for DeviceNet master interface -
ICPDAS I-8088W
8-channel PWM Output And 8-Channel isolated DI Module
● Automatic generation of PWM outputs by hardware, without software intervention.
● 10Hz ~ 500kHz (non-continuous) PWM output frequency with 0.1% ~ 99.9% duty cycle
● Software and hardware trigger mode for PWM output
● Individual and synchronous PWM output
● Using software trigger mode, you can set configuration for all PWM channels then trigger them one by one or all of them at the same time.
● Burst mode PWM operation for standby
● DI channel can be configured as simple digital input channel or hardware trigger source of the PWM output. -
ICPDAS I-87088W
8-Channel PWM Output and 8-Channel High Speed Counter Module
-
ICPDAS I-87089W
1-channel Vibrating Wire Input Module
● Support 8 ~ 32 Vibrating Wire inputs
● Support 450 ~ 6000 Hz Vibrating Wire sensor
● Support channel to channel isolation -
ICPDAS M-7088
8-Channel PWM Output and 8-Channel High Speed Counter Module
● Automatic generation of PWM outputs by hardware, without software intervention
● 10Hz ~ 500KHz PWM output frequency with 0.1%~99.9% duty cycle
● Software and hardware trigger mode for PWM output
● Individual and synchronous PWM output (Using software trigger mode, you can set configuration for all PWM channels then trigger them one by one or all of them at the same time)
● Burst mode PWM operation for standby
● DI channel can be configured as simple digital input channel or hardware trigger source of the PWM output -
ICPDAS M-7088D
8-Channel PWM Output and 8-Channel High Speed Counter Module with LED Display
● Automatic generation of PWM outputs by hardware, without software intervention
● 10Hz ~ 500KHz PWM output frequency with 0.1%~99.9% duty cycle
● Software and hardware trigger mode for PWM output
● Individual and synchronous PWM output (Using software trigger mode, you can set configuration for all PWM channels then trigger them one by one or all of them at the same time)
● Burst mode PWM operation for standby
● DI channel can be configured as simple digital input channel or hardware trigger source of the PWM output
6 artikel(en)
per pagina
