Skip to Main Content »

Search Site
  • Fieldworks EN
  • Fieldworks NL

ISA Bus I/O Boards

All the I/O boards are widely applied in various fields of automation systems. In brief, digital I/O boards are for monitoring and controlling logic signals such as button, switch, relay, on/off, high/low and open/close conditions, analog I/O boards are for analog signals acquisition or transmitting application, and the timer, counter and frequency boards are for pulse signals measurements.

Items 1 to 20 of 30 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
  1. 10-channel Timer/Counter Board

    ICPDAS TMC-10

    10-channel Timer/Counter Board
     

    ● On board four 8254 timer/counter chips
    ● Eight independent 16-bit timer / counter and two cascaded 32-bit Timer/Counter
    ● 11 interrupt levels ,jumper selectable
    ● Two internal clock source
    ● Eight channel external clock source
    ● 8-bit digital output

     

      

  2. 144-channel OPTO-22 DIO Board

    ICPDAS DIO-144

    144-channel OPTO-22 DIO Board
     

    ● Double side SMT , short card, power saving
    ● 144 digital I/O lines
    ● Emulate 8255 mode 0 (Basic Input / Output mode)
    ● Buffer output for higher driving capability than 8255
    ● Register compatible to 722 series
    ● Programmable interrupt handling
    ● Four 50-pin Header
    ● Output status readback

     

      

  3. 96-channel OPTO-22 DIO Board

    ICPDAS DIO-96

    96-channel OPTO-22 DIO Board
     

    ● Double side SMT , short card, power saving
    ● 96 digital I/O lines
    ● Emulate 8255 mode 0 (Basic Input / Output mode)
    ● Buffer output for higher driving capability than 8255
    ● Register compatible to 722 series
    ● Programmable interrupt handling
    ● Four 50-pin Header
    ● Output status readback

     

      

  4. 32-channel Digital Input & 32-channel Digital Output with Timer/Counter Board

    ICPDAS DIO-64/6

    32-channel Digital Input & 32-channel Digital Output with Timer/Counter Board
     

    ● 32 digital input lines
    ● Buffer output for higher driving capability
    ● 3 independent programmable 16 bit down counter
    ● One 16-bit counter , one 32 bit counter with a 4 MHz time base
    ● Breadboard area for add-on circuit
    ● Backward compatible to 720 series card

     

      

  5. 32-channel Digital Input & 32-channel Digital Output with Timer/Counter Board

    ICPDAS DIO-64/3

    32-channel Digital Input & 32-channel Digital Output with Timer/Counter Board
     

    ● 32 digital input lines
    ● Buffer output for higher driving capability
    ● 3 independent programmable 16 bit down counter
    ● One 16-bit counter , one 32 bit counter with a 4 MHz time base
    ● Breadboard area for add-on circuit
    ● Backward compatible to 720 series card

     

      

  6. 48-channel Digital I/O Board

    ICPDAS DIO-48

    48-channel Digital I/O Board
     

    ● Connects directly to DB-24P, DB-24R, DB-24PR, DB-885B, or any OPTO-22 compatible daughter board
    ● 48 digital I/O lines
    ● One 16-bit counter
    ● IRQ Level: IRQ3 ~ IRQ15
    ● Interrupt Trigger by Event / Timer / Port C3 , C7
    ● Clock Source can be setting: RTC (32.768 k)/2 M/4 M/8 MHz
    ● Emulate two industrial-standard 8255 mode 0
    ● Two 50-pin flat cable connector
    ● Output status read back

     

      

  7. 24-channel Digital I/O Board

    ICPDAS DIO-24

    24-channel Digital I/O Board
     

    ● 24 digital I/O lines
    ● Emulate 8255 mode 0 (Basic Input / Output mode)
    ● Buffer output for higher driving capability than 8255
    ● Register compatible to 724 series
    ● Programmable interrupt handling
    ● Output status readback

     

      

  8. 8-channel 12-bit Analog Output Board

    ICPDAS A-628

    8-channel 12-bit Analog Output Board
     

    ● Backward compatible to 726 series
    ● 8 analog output channels
    ● 12-bit resolution
    ● 0 ~ 5 V, 0 ~ 10 V, *5 V,*10 V output range
    ● 4 ~ 20 mA current loop capability, sink to ground
    ● On board reference -5 V, -10 V
    ● External reference *10 V (max.) AC or DC
    ● External Interrupt request signals, IRQ level from IRQ 3 ~ IRQ 15
    ● 16-channel digital input and 16 channel digital output connects directly to DB-16P, DB-16R DN-20, DN-37, 782 and 785 families

     

      

  9. 6-channel 12-bit Analog Output Board

    ICPDAS A-626

    6-channel 12-bit Analog Output Board
     

    ● Backward compatible to 726 series
    ● 6 analog output channels
    ● 12-bit resolution
    ● 0 ~ 5 V, 0 ~ 10 V, *5 V,*10 V output range
    ● 4 ~ 20 mA current loop capability, sink to ground
    ● On board reference -5 V, -10 V
    ● External reference *10 V (max.) AC or DC
    ● External Interrupt request signals, IRQ level from IRQ 3 ~ IRQ 15
    ● 16-channel digital input and 16 channel digital output connects directly to DB-16P, DB-16R DN-20, DN-37, 782 and 785 families

     

      

  10. 62.5 kS/s 12-bit Analog & Digital I/O Board

    ICPDAS A-812PG

    62.5 kS/s 12-bit Analog & Digital I/O Board
     

    ● 12-bit A/D converter
    ● 12-bit D/A converter
    ● 16 single-ended
    ● 62.5 k/s sampling rate
    ● Two 12-bit analog output channels
    ● Analog Output Range : 0 ~ 5 V, 0 ~ 10 V
    ● Software programmable gain: 1, 2, 4, 8, 16
    ● Interrupt handling
    ● A/D Trigger modes: Software Trigger, Pacer Trigger, External Trigger, Event Trigger
    ● A/D data transfer modes: Polling , interrupt , DMA
    ● 16 digital input & 16 digital output

     

      

  11. 35 kS/s 12-bit Analog & Digital I/O Board

    ICPDAS A-8111

    35 kS/s 12-bit Analog & Digital I/O Board
     

    ● 12-bit A/D converter
    ● 12-bit D/A converter
    ● 8 single-ended or 8 differential input channels
    ● 35 k/s sampling rate
    ● One 12-bit analog output channel
    ● Analog Output Range: 0 ~ 5 V, 0 ~ 10 V
    ● Software programmable gain:1, 2, 4, 8, 16
    ● Interrupt handling
    ● A/D Trigger modes: Software Trigger, Pacer Trigger, External Trigger, Event Trigger
    ● A/D data transfer modes: Polling , interrupt , DMA
    ● 16 digital input & 16 digital output
    ● 37 pin D-Sub connector

     

      

  12. 45 kS/s 12-bit Analog & Digital I/O Board (Low Gain version)

    ICPDAS A-821PGL

    45 kS/s 12-bit Analog & Digital I/O Board (High Gain version)
     

    ● 12-bit A/D converter
    ● 12-bit D/A converter
    ● 16 single-ended or 8 differential input channels
    ● 45 k/s sampling rate
    ● One 12-bit analog output channel
    ● Analog Output Range: 0 ~ 5 V, 0 ~ 10 V
    ● Software programmable high gain: 1, 2 , 4, 8
    ● Interrupt handling
    ● A/D Trigger modes : Software Trigger, Pacer Trigger, External Trigger, Event Trigger
    ● A/D data transfer modes: polling, interrupt, DMA
    ● 16 digital input & 16 digital output
    ● 37 pin D-Sub connector

     

      

  13. 45 kS/s 12-bit Analog & Digital I/O Board (High Gain version)

    ICPDAS A-821PGH

    45 kS/s 12-bit Analog & Digital I/O Board (High Gain version)
     

    ● 12-bit A/D converter
    ● 12-bit D/A converter
    ● 16 single-ended or 8 differential input channels
    ● 45 k/s sampling rate
    ● One 12-bit analog output channel
    ● Analog Output Range : 0 ~ 5 V, 0 ~ 10 V
    ● Software programmable high gain: 1, 10, 100, 1000
    ● Interrupt handling
    ● A/D Trigger modes : Software Trigger, Pacer Trigger, External Trigger, Event Trigger
    ● A/D data transfer modes: polling , interrupt , DMA
    ● 16 digital input & 16 digital output
    ● 37 pin D-Sub connector

     

      

  14. 125 kS/s 16-channel 12-bit Analog Input, 1-channel 12-bit Analog Output with 16 Digital Input/16 Digital Output (Low Gain version)

    ICPDAS A-822PGL

    125 kS/s 16-channel 12-bit Analog Input, 1-channel 12-bit Analog Output with 16 Digital Input/16 Digital Output (Low Gain version)
     

    ● 12-bit A/D converter
    ● 12-bit D/A converter
    ● 16 single-ended or 8 differential input channels
    ● 125 k/s sampling rate
    ● Two 12-bit analog output channels
    ● Analog Output Range : 0 ~ 5 V, 0 ~ 10 V
    ● Software programmable high gain: 0.5, 1, 2, 4, 8
    ● Interrupt handling
    ● A/D Trigger modes : Software Trigger, Pacer Trigger, External Trigger , Event Trigger
    ● A/D data transfer modes : polling , interrupt , DMA
    ● 16 digital input & 16 digital output
    ● 37 pin D-Sub connector

     

      

  15. 125 kS/s 16-channel 12-bit Analog Input, 1-channel 12-bit Analog Output with 16 Digital Input/16 Digital Output (High Gain version)

    ICPDAS A-822PGH

    125 kS/s 16-channel 12-bit Analog Input, 1-channel 12-bit Analog Output with 16 Digital Input/16 Digital Output (High Gain version)
     

    ● 12-bit A/D converter
    ● 12-bit D/A converter
    ● 16 single-ended or 8 differential input channels
    ● 125 k/s sampling rate
    ● Two 12-bit analog output channels
    ● Analog Output Range : 0 ~ 5 V, 0 ~ 10 V
    ● Software programmable high gain: 0.5, 1, 5, 10, 50, 100, 500, 1000
    ● Interrupt handling
    ● A/D Trigger modes : Software Trigger, Pacer Trigger, External Trigger , Event Trigger
    ● A/D data transfer modes : polling , interrupt , DMA
    ● 16 digital input & 16 digital output
    ● 37-pin D-Sub connector

     

      

  16. 125 kS/s 16-channel 12-bit Analog Input, 2-channel 12-bit Analog Output with 16 Digital Input/16 Digital Output (Low Gain version)

    ICPDAS A-823PGL

    125 kS/s 16-channel 12-bit Analog Input, 2-channel 12-bit Analog Output with 16 Digital Input/16 Digital Output (Low Gain version)
     

    ● 12-bit A/D converter
    ● 12-bit D/A converter
    ● 16 single-ended or 8 differential input channels
    ● 125 k/s sampling rate
    ● Two 12-bit analog output channels
    ● Analog Output Range: 0 ~ 5 V, 0 ~ 10 V
    ● Software programmable gain: 0.5, 1, 2, 4, 8
    ● Interrupt handling
    ● A/D Trigger modes: Software Trigger, Pacer Trigger, External Trigger, Event Trigger
    ● A/D data transfer modes: Polling , interrupt, DMA
    ● 16 digital input & 16 digital output
    ● 37 pin D-Sub connector

     

      

  17. 125 kS/s 16-channel 12-bit Analog Input, 2-channel 12-bit Analog Output with 16 Digital Input/16 Digital Output (High Gain version)

    ICPDAS A-823PGH

    125 kS/s 16-channel 12-bit Analog Input, 2-channel 12-bit Analog Output with 16 Digital Input/16 Digital Output (High Gain version)
     

    ● 12-bit A/D converter
    ● 12-bit D/A converter
    ● 16 single-ended or 8 differential input channels
    ● 125 k/s sampling rate
    ● Two 12-bit analog output channels
    ● Analog Output Range: 0 ~ 5 V, 0 ~ 10 V
    ● Software programmable gain: 0.5, 1, 5, 10, 50, 100, 500, 1000
    ● Interrupt handling
    ● A/D Trigger modes: Software Trigger, Pacer Trigger, External Trigger, Event Trigger
    ● A/D data transfer modes: Polling , interrupt , DMA
    ● 16 digital input & 16 digital output
    ● 37 pin D-Sub connector

     

      

  18. 100 kS/s 16-channel 16-bit Analog Input, 2-channel 12-bit Analog Output with 16 Digital Input/16 Digital Output Multi-function Board

    ICPDAS A-826PG

    100 kS/s 16-channel 16-bit Analog Input, 2-channel 12-bit Analog Output with 16 Digital Input/16 Digital Output Multi-function Board
     

    ● 16-bit A/D converter
    ● 12-bit D/A converter
    ● 16 single-ended or 8 differential input channels
    ● 100 k/s sampling rate
    ● Two 12-bit analog output channels
    ● Analog Output Range: 0 ~ 5 V, 0 ~ 10 V
    ● Software programmable gain: 0.5, 1, 2, 4, 8
    ● Interrupt handling
    ● A/D Trigger modes: Software Trigger, Pacer Trigger, External Trigger, Event Trigger
    ● A/D data transfer modes: Polling, interrupt, DMA
    ● 16 digital input & 16 digital output
    ● 37 pin D-Sub connector

     

      

  19. Isolated 16 Digital Input & 16 Relay Output Board

    ICPDAS P16R16DIO

    Isolated 16 Digital Input & 16 Relay Output Board
     

    ● Relay output channel
    ● Optically isolated digital input channels
    ● AC/DC signal input ; AC signal input with filter
    ● Connector pin assignment is compatible to 725 series
    ● Power Requirements: 200 mA @ +5 V (max.); 260 mA @ +12 V (max.)
    ● LED indicator for each relay output state

     

      

  20. Isolated 8 Digital Input & Relay Output Board

    ICPDAS P8R8DIO

    Isolated 8 Digital Input & Relay Output Board
     

    ● Relay output Channel
    ● Optically isolated digital input channels
    ● AC/DC signal input; AC signal input with filter
    ● Connector pin assignment is compatible to 725 series
    ● Power Requirements: 200 mA @ +5 V (max.); 260 mA @ +12 V (max.)
    ● LED indicator for each relay output state

     

      

Items 1 to 20 of 30 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
 

Compare Products

You have no items to compare.

Contact Details

Fieldworks Direct B.V.
Veemarktkade 8
NL-5222 AE DEN BOSCH

Tel.: +31 (0)73 624 1111
Fax: +31 (0)73 624 1112
E-mail: info@fieldworks.nl

During office hours
from 9:00 AM - 17:00 PM.